Bearhawk Aircraft Bearhawk Tailwheels LLC Eric Newton's Builder Manuals Bearhawk Plans Bearhawk Store

Announcement

Collapse
No announcement yet.

Planning to build a 4 place QB kit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Planning to build a 4 place QB kit

    Hi, I'm getting close to placing an order for a 4 place QB kit, based in Peth Western Australia, hi to all.
    http://www.mykitlog.com/yadama

  • #2
    Good on ya mate - you won't be disappointed!

    Comment


    • #3
      Hello from Florida and welcome aboard!
      My wife's cousin lives a little to the east of you in the New Castle area (I think). Somewhere on the east coast.
      John, Naples FL
      Bearhawk 4-Place Plans #1316
      Patrol Plans #006
      Experience is something you get, right after you need it.

      Comment


      • #4
        Thanks guys, i will keep you in the loop, and will let you know once i place an order.
        http://www.mykitlog.com/yadama

        Comment


        • #5
          I've been corrected, which happens a lot. My wife's cousin lives in a village called Narrawalee. 250kms south of Sidney.
          John, Naples FL
          Bearhawk 4-Place Plans #1316
          Patrol Plans #006
          Experience is something you get, right after you need it.

          Comment


          • #6
            Hi All

            My 2nd hand QB kit has arrived in Perth and I am busy setting up the "BearCave". Looking through the plans I cant find #7 does it exist within the plans set???
            Attached Files
            http://www.mykitlog.com/yadama

            Comment


            • #7
              Plans Drawing #7 is the full size wing rib drawing on a sheet of mylar. It comes rolled up with the plans. It is used to make the formblocks to fabricate the wing ribs. Since you have kit, you wont need it unless you have to make a repair and make some new ribs some day.
              Eric Newton - Long Beach, MS
              Bearhawk Tailwheels and Builder's Manuals
              http://bhtailwheels.com

              Comment


              • #8
                Actually it looks like drawing 7 is hanging on the wall in your last picture.
                Eric Newton - Long Beach, MS
                Bearhawk Tailwheels and Builder's Manuals
                http://bhtailwheels.com

                Comment


                • #9
                  Thanks Eric

                  there it was right in front of me.....
                  http://www.mykitlog.com/yadama

                  Comment


                  • #10
                    If I remember correctly, it can also be used for making the horz stabilizer rib profile for those who decide to make that mod (if you want to build them instead of buying from Mark G.)

                    Comment

                    Working...
                    X