Tweet
There is a new Engineering Change Notice for the Bearhawk Patrol. It is dated March 2014. You can view it here (scroll down to the March 2014 notice):
(link updated by admin due to URL change)
(link updated by admin due to URL change)
-
Last edited by jaredyates; 01-13-2020, 10:20 AM. -
Does this apply to both sides of the Fuselage, or just the right (door) side?Phil Schaefer
Patrol #073
Working on Spars -
Hi Phil, Yes both sides.Comment
-
Eric, Is there some way to post the new drawing bigger, my old man eyes are having a hard time reading the tubing sizes. I tried saving as a jpeg file then zooming in but the resolution is not good enough.
Thanks
DougScratch building Patrol #254Comment
-
Let me work on it tonight. I will post up a larger image tonight.Comment
-
Okay - go look at the engineering change. scroll down and you will see a link to take you to a larger view of the drawing.Comment
-
Thank you Eric. That is so much better. In case nobody has said it lately, Thanks for all you do for us idiots trying to build an airplane.
DougScratch building Patrol #254Comment
-
I'm curious about the change to the aileron pulley bracket. Mark G. said this change is not incorporated in the factory built wings. Why are we required if the factory isn't. Who authorized this change, Bob? What initiated this change?
Thanks
Gerry
Patrol #30 wingsComment
-
Gerry, Bob is the one who issues those sorts of things. Try calling him on Monday. We are both planning to be at the same fly-in tomorrow, so I'll try and ask.Comment
-
Hi Mark, I emailed you concerning this part a few weeks ago. Here is the string;
We have not made any changes in those Gerry. Mark
Date: Thu, 8 May 2014 10:18:47 -0700
From: geraldmorrissey@yahoo.com
Subject: Patrol aileron cable pulley bracket
To: n95mf@hotmail.com
Hi Mark, I have the old style factory made brackets. Can I buy brackets that are to the new configuration with the extra 6 degree bend? I already have the other page 15 parts.
Thanks
Gerry
Patrol #30
Comment
Comment