Inspecting the angles, getting ready for spar bending

[Chris In Milwaukee]

Since the Expedition's wing is scaled up from the Patrol wing, I figured it would be good to verify the angles are correct. Taking a look at the plans for the forward and aft spar flanges:





And comparing them to mine:







So far, the proportions are spot on, and the angles are within my tolerance and easily tweaked to accommodate assembly.

I'm getting my cut list together, so I can get to Oshkosh next weekend and get stiffeners and attach angles cut, and get all of the spar webs bent. Here's hoping I can get everything together by then.