N942VT
Senior Member
Last Activity: Today, 06:04 AM
Joined: 09-23-2013
Location:
-
Not sure about the Artex but ACK specifically says their ELT / antenna is fine inside a tube structure. Provide a good ground plane and you should be... -
DAR's don't care about wire labels, mechanics do.Leave a comment:
-
May interfere with the windshield that way, check to be sure. I run them inside and come out behind the windshield post. Keep it as low as possible....Leave a comment:
-
Seat pan is riveted to the frame with the snap base, the cushion and fabric are made to snap into those bases. The seat slides with no interference....Leave a comment:
-
Sport Aircraft Seats
I've been working with Daniel at Sport Aircraft Seats to develop patterns for the Bearhawk seats. The great part of his system is that he will be able... -
That seems like a lot of water. Curious how fresh the batch of paint is, it will get thicker as it sits in the can. I try to keep it less than 6 months... -
I would try that Iwata, mine has a better fan than any other gun. You're mixing 4:1:1 with a 1.3 tip?
I've had success with other metal flake...Leave a comment:
-
Rod, can you outline your spray technique? I've sprayed quite a bit of Stewarts and have mitigated the tiger striping problem with the following technique....Leave a comment:
-
Has anything progressed with these wires? I'm about to place an order for two sets - $1600 and 4 months lead time - Ouch!!Leave a comment:
No activity results to display
Leave a comment: