kilohotel
Member
"Bearhawk Bravo 4-Place Scratch Building"
Last Activity: 01-11-2020, 06:53 PM
Joined: 08-16-2018
Location: Northern Idaho
-
As drawn on the plans, there is not enough space for 3/8". As you can see in the attached photo, there is only 1/2 inch between the edge of the hole... -
Make sure you are basing the distance between the flange edges on a 1/4-inch lightning hole flange and that only the two front holes get flanged (see...Leave a comment:
-
Thanks Brooks! I'm ready to start drilling and attaching, so even though it only makes a 1/2 inch difference...barring any other reason to the contrary,...Leave a comment:
-
Jared,
Considering that construction methods are similar and crossover for each of the various designs, might it also be helpful to have...Leave a comment:
-
Center rib stiffener angle orientation
The rib plan (sheet 3 or 3B) depicts the center rib stiffeners installed with the vertical leg oriented toward the trailing edge of the wing. I know that... -
Thanks Mark! That looks great! I will mind the rivet locations!Leave a comment:
-
Todd,
I bent the lightening holes flanges first using the rubber press method on my first batch of aileron ribs...when I went to bend the...Leave a comment:
-
Aileron & flap trailing rib fit to spars
I have a question regarding how the flap & aileron trailing rib fit into the spars...
...hopefully this effort to further explain the... -
That's awesome Mike! Thanks for sharing!Leave a comment:
No activity results to display
Leave a comment: