davzLSA
Junior Member
Last Activity: 04-23-2019, 07:04 PM
Joined: 07-05-2016
Location: McCalla Alabama
-
Hi Cameron, the weight and balance issue for a light corvair engine has been addressed by Bob and William Wynne, William worked with Bob to design an... -
I am happy he survived, now we just need a speedy recovery. -
Congrats Whee, the great reward for a lot of work sweat blood and im sure tears at times. Great job man!!!Leave a comment:
-
All the prats of my engine are William Wynne parts I bought from him through Sport Performance Aviation, I also test ran it at a finishing school that... -
the prop im going to use is a 68 inch warp drive. that is the optimum prop for this engine air frame combo -
Ever considered a corvair engine? It is a good replacement for the o200 and much cheaper. Just saying. You can get a new engine of 100HP for the price...Leave a comment:
-
If it is a multi angle grinding machine it is very useful if you are rebuilding engine heads. If you dont need it to grind valves you could probably sell...Leave a comment:
-
hi Guys, Has anyone built in hard points for jacking during the build process? This is something I have been thinking about doing with my LSA, I know...Leave a comment:
-
Hi syvolom Im a scratch builder and I have a lathe and a mill and a son who is a machinist and even with that I still have to pick my battles and I do... -
Hi Brad, Thanks for bringing that to my attention, but i had full travel side to side on my sticks but I will take a closer look to see if the rod end...Leave a comment:
-
Thanks for the input Mark, Ill probably just do what you always say to do "stick with the plans". Here are some pictures of my latest progr...Leave a comment:
-
Hey Guys wanted to ask if anyone building the LSA is using square tubing to build the door and window frames? I think using square tubing would make it...Leave a comment:
-
Hi Guys, I finally have the elevator control linkage set up in my LSA. To me it is a mile stone, I can now sit on my airplane and make airplane noises....Leave a comment:
-
I would recommend you refer to the AC 43.13. Do what it recommends and you will be safe.Leave a comment:
-
If I were in the market for a patrol kit I would buy it. But Im committed to my LSA. I hope who ever buys it does not try to take advantage of the situation,...Leave a comment:
-
would a friction lock on the trim wheel or lever work? -
no sense in reinventing the wheel right? -
With the set of RV wings I built, I used all thread to align all the nose ribs, then strapped the nose skin down on them and reached in through the lightening...Leave a comment:
No activity results to display
Leave a comment: