priming the trailing edge

[Chewie]

For folks who are priming their trailing edges, are you priming them before bending? Based on the test samples I made, there won't be much access to get a gun or brush inside it if I bend it first.

[geraldmorrissey]

You might consider Aircraft Soruce p/n 03-48900. Relieve the fwd flanges where the trailing edge of the ribs fit. I think you could get a pipe cleaner or acid brush in there. Prime the fay surfaces only.
Gerry
Patrol #30

[Chewie]

Only issue there Gerry is the shipping, about the same cost as a full 4x12 sheet. Maybe Vans has something. (Aside from a new website. And lots of job openings, wow!)