Search results

  1. nichzimmerman

    Conduit for wiring in wings

    After a few years of deliberation, I ended up with the Vans corrugated tubing running through the jig pin holes of the nose ribs (enlarged) with plastic bushings. This way there is no metal hardware (weight). If you were installing this in a quick build wing without access to every nose ribs...
  2. nichzimmerman

    Third row seat

    I have a factory rear seat and when I welded the bushings into the fuselage I ensured they were perfectly square so the seat could be turned around. With club seating, the front seats will have to be fairly far forward and there is still minimal room between the 2nd and 3rd row seat. Not enough...
  3. nichzimmerman

    Help! Spar flange damage

    It's quite nice when someone volunteers to help in the shop, especially when it comes time to dimple and deburr the wing assembly. Little did I know how the many ways that could go very wrong. In a few places on the rear spar, the yoke of the squeezer caught on a protruding rivet or...
  4. nichzimmerman

    Fuel tank boo boo fix

    Good day all, My main tank's aft hole is out of round thanks to a drop on the floor. Any ideas on the best fix? All I can think of is buy a 3/8" NPT tap and run it through, but I don't like the idea of aluminum shavings in the tank. Thanks in advance. - Nic, #1217
  5. nichzimmerman

    Corrosion Pictures

    Good day all, we talk a lot about corrosion on here and I figured it wouldn't hurt to have a thread dedicated to PICTURES of different types of corrosion, materials, and areas where it's been noticed so that those of us who aren't as metallurgically inclined can benefit from it. It can also be a...
  6. nichzimmerman

    Stainless Fuel Tank Straps

    I'm considering using stainless steel shipping strap material for my fuel tank straps. McMaster carries a 302 stainless material that is 0.75"x0.025" as specified. Based on it's estimated breaking strength, it looks to have the properties that you see around the web for 302 stainless. It would...
  7. nichzimmerman

    Casting Lead Balance With Profiled Elevator

    I bought a profiled stab set and poured lead a few months ago. I clamped aluminum sheet on top and bottom and screwed a small piece on the inboard side. I also put some screws in the curved leading edge for the lead to grip but in the attached picture the aft screw wasn't inside the lead and...
  8. nichzimmerman

    Screw hole size

    There are plenty of places on these aircraft that use machine screws. I'm embarassed to ask such an elementary question, but I couldn't find a definitive answer through Google. What drill bit size is considered "best practice" when drilling for these screws (#4's, #6's, and #8's)? I can find...
  9. nichzimmerman

    Skinning wings before riveting ribs

    I have my spars and ribs assembled and cleco'd together and was pondering continuing with the skinning process before riveting the ribs to the spars. I would appreciate any opinions you all have. Pros: -It allows me disassemble anything that I need to, just in case. -It makes the...
  10. nichzimmerman

    Control Stick Pushrod details

    What size bearings are used in the control stick pushrod? In the 4-place, there is a little pushrod that connects the control stick assembly to the bellcrank which is connected by cables to the elevator. I measured the shaft diameter on the bearings in my plans and they look to be somewhere in...
  11. nichzimmerman

    Rear float fittings

    That pacer is a piece of art. The PA18 fitting idea is growing on me. But I still can't find them on the AA website. Alternatively, here is a pic (don't remember what website I stole it from) of a bolt-on fitting. Seems like this could be adapted to work with the BH fittings prescribed by the...
  12. nichzimmerman

    Rear float fittings

    I did some searching, and it doesn't appear that a definitive conversation has taken place on rear float fittings. It looks like there are four options: Buy weld-on fittings from Avipro (I cant find a picture of what they look like on the fuselage) Copy the main gear fittings (more work and...
  13. nichzimmerman

    Wing fittings, etc

    First, some eye candy. Here goes my first shot at attaching a photo: http://bearhawkforums.com/filedata/fetch?filedataid=2880&type=thumb If that worked, you may notice that this was taken just after nap time. You may also notice the absence of wing attach fittings. I haven't seen a method of...
  14. nichzimmerman

    Evaluating an engine core -- O-540

    I know there are some engine experts around here, so let me throw this out there for commentary. There is an O-540A1D5 engine for sale that I can get delivered to my door for about $6000. It is being sold by a startup salvage company who took this engine out of a Commanche that had sat on a...
  15. nichzimmerman

    Gear cluster welding

    I have been happy with the quality of my gas welds up to this point, but this morning I completed the first landing gear cluster, and the words that kept coming to mind were, "if you can't tie a knot tie a lot". On the back side of that cluster, there is lots of welding of surfaces that are a...
  16. nichzimmerman

    Firewall Flange

    In a post on another topic, someone mentioned that kit firewalls have an aluminum flange riveted on rather than just hammering a flange in the stainless. I was just about to fabricate my firewall from .016 material, and this is the first that I heard of an alternative to the plans. Anyone know...
  17. nichzimmerman

    Profiled ribs

    Has anyone here made profiled steel ribs for your 4 place bearhawk's horizontal and vertical stab? I prefer this method to the wood inserts and if there is already a set of form blocks out there I will buy them or pay shipping both ways. thanks! Sent from my SCH-I535 using Tapatalk
  18. nichzimmerman

    Cold weather building

    So this time of year my garage in Ohio does not often see temperatures above freezing. This morning, I noticed that some of the spar rivets had some chipped primer around them. The 8 degree F temperature had apparently made it brittle enough to chip when I was driving the rivets. Made me...
  19. nichzimmerman

    Powder coating fuselage

    Just found kicks, I got a quote for having a 4 place fuselage sand blasted and powder coated. It came out to $1200. I know several kit manufactures offer this option, is there any disadvantage to powder coating vs priming? And for those of you who have primed their fuselage, would you lay $1200...
  20. nichzimmerman

    Flap and Aileron trailing edge radius

    The plans call for a 3/32" bend radius on the trailing edge of the flaps and ailerons and an old beartracks tip suggested using the brake foot to squish the bend down to 15 degrees. The problem im facing is that the squishing action always causes the bend radius to be reduced down to 1/16" or so...
Back
Top