Search results

  1. Luke68

    Ground loop and aftermath

    Yesterday I had the very unfortunate experience of being involved in my first ground loop. N274LC was signed off less than a week ago and has less than three hours on it, I was utilizing the dual pilot program with my instructor (CFII with close to 2000 hrs of tail wheel time) for the first few...
  2. Luke68

    Bearhawk 4-Place N274lc

    N274LC made its first flight on 11-15-23, only stayed in the air for 20 minutes due to high oil temps but I considered it a success
  3. Luke68

    Adding weight to ailerons after covering

    Had my ailerons balanced with what I thought was the fabric weight figured in but as it turns out the fabric and paint were heavier than expected has anyone added weight to the leading edge after covering and if so what is a good method for doing so?
  4. Luke68

    Wing hard points

    Just got the latest issue of sport aviation and on the cover is what looks like a carbon cub on steroids but what really caught my eye was the motor cycles hanging off the wings. I’m not saying I want to strap motor cycles to my wing but I’m wondering if anyone has looked into hard points...
  5. Luke68

    Nose bowl jigging

    I have a question about squaring the nose bowl with the fire wall. I just finished building the plywood hub that is used for holding the nose bowl to the crank, when I clamp a straight edge on it to check squareness to the firewall the sides are perfectly even at 41 3/4” on both sides but the...
  6. Luke68

    14” nose bowl

    wondering where I can get a 14” nose bowl for a four place? i also have a new two piece 13” bowl that I would sell at a reasonable price Luke
  7. Luke68

    Cabin headliner

    i have been trying to decide what to do with the cabin headliner. I would really like to leave all the tubing exposed for a roomier feel and also as handles for getting in and out of the plane, but living in central WI and planing on doing a lot of winter flying I think a little insulation would...
  8. Luke68

    Streamline horizontal stab

    I read somewhere that you need to change the angle of the hor stab once you install the wood profile strips , can someone fill me in on how I do that. thanks Luke
  9. Luke68

    Rust under the paint

    As I was preparing my tail feathers for fabric covering I noticed some light rust come through the paint, as I sanded the paint away the rust looked almost like worm trails. There were six or seven places where this occurred and it was not a big deal to remedy I just wanted other builders to...
  10. Luke68

    NACA inlets

    Does anyone know where to buy decent quality NACA inlets? I ordered two from acs but they don’t fit together nice and the outlet is supposed to be 2” but it’s more like 2 3/8”. I think I can make these work for vents in the wing root but need two more for the boot cowl. Thanks Luke
  11. Luke68

    Inspection cover in tail

    I made and inspection cover and backing ring for one side of the tail but now I'm not sure on how to attach it to the fabric once I get that far. I thought it would work just like a regular inspection ring but the nutplates are going to be in the way of it laying flat. Wondering how others did...
  12. Luke68

    Stringers

    What is everyone doing for stringers? I would prefer to use the heavy extruded aluminum ones but my kit came with the aircraft Spruce stringers and they are really flimsy, Mark G told me to get in touch with Superior Mason Corp but they have since discontinued making the 5/16 x 1 extruded
  13. Luke68

    Brake lines

    I was reading the latest bear tracks about the brake system hardware and it got me thinking, why couldn't I use flexible brake lines like in my friends RV? Less fittings to leak, lighter and possibly cheaper. I looked it up in Spruce and for the NSR tubing ( rated for 2500 psi) and all the...
  14. Luke68

    Third row seat

    Im wondering if anyone has any experience installing a seat in the baggage area. When I purchased my quick build kit we had a family of four but since then our daughter was born so I'm thinking it's going to be a tight squeeze trying to get everyone seated and buckled in. i have found some...
  15. Luke68

    Aileron pulley bracket

    I'm wondering why in the plans the aileron pulley bracket that attaches to the strut attach fitting has a 1/4" hole called out while the ms 20220-2 pulley and the cable retainer have 5/16"? Am I missing a bushing?
  16. Luke68

    Fuel tank oil canning

    I am having trouble with one of my main fuel tanks oil canning, if I lightly push on the filler neck the top of the tank pops down so one side of the neck is about 1/8" lower than the other, I can pull it back by using a bar but can't figure out how to make it stay. I know steel can be heated...
  17. Luke68

    Second hand quick build

    Recently bought a quick build kit that was already started, it came with an 0-540B and a three blade Hartzell prop along with a lot of other goodies. Now just need to finish the 7AC that's in my shop so I can get started, can't wait.
Back
Top