Kit supplied split nose bowl spinner diameter

[Gary Wallace]

Hi all..im in need of a split nosebowl and not sure if the kitset nosebowl or r and b aircraft nosebowl will fit best with my spinner. If someone has a chance, could you let me know the spinner backplate area diameter. My spinner is 13 3/4 inch diameter, and am wondering how this matches up to the kit nosebowl.. and lastly, r and b nosebowl is flat on top of nosebowl across to top of spinner backplate. Does the kit nosebowl rise a bit from the top of spinner backplate to the top of the nosebowl
. I believe it does . And if so is it a half inch?, inch? I would greatly appreciappreciate a respons . Thanks so muc . Gary

[Gary Wallace]

one last measurement i would appreciate is when nosebowl is sitting on a table or floor, the actual height from top of nosebowl to bottom. 24 " ish? thanks

[Gary Wallace]

So it seems to me that the kitset nose bowls are a 14" dameter and bobs nose bowls are set up for a 13" spinner. Can someone confirm this for me please . also on the kitset nose bowl, i would appreciate the total height of nose bowl,, 22 to 24"? and distance nose bowl rises above the spinner backplate to the top of cowl. 2"? thanks