Elevator Trim Horn Thickness

[Steve W]

Anyone know what the call out is for the material of the small trim horn at the outer end of the 1/2" torque tube in the stabilizer? I see .050" for the end fittings on the push/pull rod but nothing for the horn itself. Thanks to those that reply.

Steve P203

[LukeS]

It looks like .050 to me on the 4-place. I'm looking at drawing 20, upper right hand. The LSA also appears to be .050 (drawing 19 upper right), so I would guess that the patrol is the same

[Steve W]

Thanks Luke. .050 it will be!