Dynon roll servo

[BravoGolf]

While working on the wings I would like to add mounting support for a Dynon servo in the wing, probably the left. Can someone share how/where they added a mount for the servo? And if you located it somewhere else, where?

I'm thinking between ribs 8 and 9 and adding another access cover just for the servo.

thanks

[jaredyates]

I put it under the seat instead. 20181023_143418_HDR.jpg

[BravoGolf]

Thanks for the photo. I was considering their servo for cables but didn’t consider this option.

[Bdflies]

Not Dynon, but a roll servo none the less. I mounted the roll servo in the left wing, at the bellcrank. It was mounted after the wings were complete. The aluminum angle is attached to the top wing skin with 3 pull rivets. Works well.

Let me know if you’d like more pictures.

Bill

[BravoGolf]

I figured folks would be installing a Capstand servo from a Dynon, assuming you are using Dynon equipment.