Bearhawk Aircraft Bearhawk Tailwheels LLC Eric Newton's Builder Manuals Bearhawk Plans Bearhawk Store

Announcement

Collapse

Guidelines for this Section

Please post thoughtfully in this section. Create/maintain one thread per mishap. Focus the discussion on the event, and learning from it, rather than on the individuals. Keep in mind that any damaged Bearhawk may represent many years of lost work, many thousands of lost dollars, injury, or worse. Create posts that will enhance safety of the Bearhawk fleet and educate other Bearhawk operators. It is not always easy for someone to come forward after a mishap, be tactful and don't make someone regret admitting a mistake.
See more
See less

2016 n507sr lodcog

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2016 n507sr lodcog

    Narrative:
    The pilot of the tailwheel-equipped airplane reported that, during a touch-and-go landing on a turf airstrip, he applied power for takeoff, the airplane drifted left, and he applied right aileron and left rudder. As the airplane accelerated, it began drifting farther left until it departed the runway onto the grass. The pilot reported that the airspeed was about 60 mph and that he felt he could fly out of the situation. However, he realized the airplane was approaching a hill with trees and a house too quickly and would not clear the trees. He then applied right rudder and the airplane turned 90° toward the runway and began to skid. The airplane skidded across the runway and hit a ditch. The left landing gear collapsed followed by the right, and the airplane skidded to a stop.
    The airplane sustained substantial damage to the left wing and fuselage.
    The pilot reported that there were no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.
    A review of recorded data from the automated weather observation station located about 14 miles southwest of the accident site revealed that, at 1255, the wind was from 190° at 13 knots, gusting to 21 knots. The airplane landed on runway 17.

    Probable Cause:
    The pilot’s failure to maintain directional control during takeoff, which resulted in a runway excursion.​

    Aviation Safety Network Page

    NTSB Report
    Nev Bailey
    Christchurch, NZ

    BearhawkBlog.com - Safety & Maintenance Notes
    YouTube - Build and flying channel
    Builders Log - We build planes
Working...
X