Bearhawk Aircraft Bearhawk Tailwheels LLC Eric Newton's Builder Manuals Bearhawk Plans Bearhawk Store

Announcement

Collapse

Guidelines for this Section

Please post thoughtfully in this section. Create/maintain one thread per mishap. Focus the discussion on the event, and learning from it, rather than on the individuals. Keep in mind that any damaged Bearhawk may represent many years of lost work, many thousands of lost dollars, injury, or worse. Create posts that will enhance safety of the Bearhawk fleet and educate other Bearhawk operators. It is not always easy for someone to come forward after a mishap, be tactful and don't make someone regret admitting a mistake.
See more
See less

2019 n22gm

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2019 n22gm

    The pilot reported that the experimental, amateur-built airplane experienced a total loss of engine power while maneuvering at an altitude of 2,500 ft mean sea level. He activated the electronic fuel injection/ignition system emergency power switch and attempted to restart the engine, but was unsuccessful. He performed a forced landing to a field, during which the airplane sustained substantial damage to the left wing and fuselage. A review of engine and flight data recorded by the electronic flight information system revealed a sudden increase (about 240°F over 1 second) in exhaust gas temperature (EGT) in the No. 1 cylinder, consistent with abnormal combustion immediately preceded the loss of engine power. Shortly thereafter, the engine rpm began to decrease, and the electrical system load increased by about 8 amps, then decreased by about 17 amps. The engine rpm continued to decrease for the next 2.5 minutes, consistent with a windmilling propeller, before it reached 900 rpm and then decreased to 0 rpm just prior to the landing. The electronic ignition circuit breaker was found activated. The reason for the abnormal combustion and the activation of the electronic ignition circuit breaker which resulted in a total loss of engine power could not be determined based on the available information.

    Probable Cause: Abnormal combustion in the No. 1 cylinder for reasons that could not be determined based on the available evidence, followed by the activation of the ignition system circuit breaker, which resulted in a total loss of engine power.​

    Aviation Safety Network Page
    The pilot reported that the experimental, amateur-built airplane experienced a total loss of engine power while maneuvering at an altitude of 2,500 ft mean sea level. He activated the ele...


    NTSB Report
    https://data.ntsb.gov/carol-repgen/a...port/99188/pdf
    Nev Bailey
    Christchurch, NZ

    BearhawkBlog.com - Safety & Maintenance Notes
    YouTube - Build and flying channel
    Builders Log - We build planes
Working...
X