Hey guys...
I was doing some measuring and put a long straight edge on my master wing template, I think its page 4 on the Bravo 4 place plans.....and noticed that the wing center line on my former is not straight...it has a 2mm rise on it near the flap/aileron spars...my center line is not straight in that area. It appears straight at the rear and front but rises in the area near flap/aileron spars.
I checked and the straight edge ruler im using is straight
If some kind soul could put a long straight edge on their Bravo wing center line plans to double check this.
its probably me distorting the plastic in some way during the application of the film...
but I thought I would ask around to see what others see on their Bravo plans.,,,its possible that since the Bravo wing is new that this bend might not have been noticed yet....
IMG_2760.JPG
I was doing some measuring and put a long straight edge on my master wing template, I think its page 4 on the Bravo 4 place plans.....and noticed that the wing center line on my former is not straight...it has a 2mm rise on it near the flap/aileron spars...my center line is not straight in that area. It appears straight at the rear and front but rises in the area near flap/aileron spars.
I checked and the straight edge ruler im using is straight
If some kind soul could put a long straight edge on their Bravo wing center line plans to double check this.
its probably me distorting the plastic in some way during the application of the film...
but I thought I would ask around to see what others see on their Bravo plans.,,,its possible that since the Bravo wing is new that this bend might not have been noticed yet....
IMG_2760.JPG
Comment