Bearhawk 4-place Plans Build

Please register if you would like to post.

Topics	Statistics	Last Post
Rudder Cable Turnbuckle Placement by alaskabearhawk Started by alaskabearhawk, 01-22-2015, 02:31 PM	22 responses 920 views 0 likes	Last Post by gregc Yesterday, 09:27 PM
Rolled Sheets for Spar Webs by Weldingiron Started by Weldingiron, 04-10-2020, 04:25 PM	5 responses 191 views 0 likes	Last Post by btdobie 05-24-2020, 10:00 AM
Wing strut attach fitting by bestbearhawk1231 Started by bestbearhawk1231, 11-04-2014, 06:13 PM	11 responses 455 views 0 likes	Last Post by James 05-20-2020, 02:47 AM
Fuel System Details by rodsmith Started by rodsmith, 02-10-2019, 01:59 PM	6 responses 340 views 5 likes	Last Post by spinningwrench 05-17-2020, 01:33 AM
Bend in my Bearhawk wing center line (Bravo) line not straight by way_up_north Started by way_up_north, 05-09-2020, 11:50 AM	8 responses 337 views 0 likes	Last Post by Chris In Milwaukee 05-16-2020, 08:59 AM
Oil temp sender gasket by Gary Wallace Started by Gary Wallace, 04-23-2020, 02:30 PM	4 responses 141 views 0 likes	Last Post by Gary Wallace 04-26-2020, 09:19 AM
Where to tap manifold pressure sender into by Gary Wallace Started by Gary Wallace, 04-15-2020, 05:28 PM	11 responses 172 views 0 likes	Last Post by Battson 04-19-2020, 04:22 PM
Fuel pressure sender location by Gary Wallace Started by Gary Wallace, 04-16-2020, 03:36 PM	7 responses 102 views 0 likes	Last Post by Gary Wallace 04-17-2020, 11:00 AM
Source for 3/8 oil cooler lines and 1/2 fuel line firewall to carb by Gary Wallace Started by Gary Wallace, 04-14-2020, 05:08 PM	7 responses 126 views 0 likes	Last Post by Gary Wallace 04-15-2020, 05:25 PM
Question about flap nose rib notches by way_up_north Started by way_up_north, 03-29-2020, 08:36 PM	8 responses 220 views 0 likes	Last Post by nichzimmerman 04-02-2020, 06:52 AM
Hoerner Wingtip Build by mswain Started by mswain, 08-02-2016, 12:22 PM	77 responses 5,419 views 3 likes	Last Post by rodsmith 03-18-2020, 10:26 AM
Aileron Lightening Holes by Weldingiron Started by Weldingiron, 01-03-2020, 11:00 PM	10 responses 534 views 0 likes	Last Post by Weldingiron 03-11-2020, 06:13 PM
Scat tube flange locations by Gary Wallace Started by Gary Wallace, 02-26-2020, 05:56 PM	20 responses 330 views 0 likes	Last Post by Gary Wallace 03-05-2020, 12:22 PM
Materiales fuselaje by Bustosm Started by Bustosm, 03-05-2020, 06:34 AM	1 response 121 views 0 likes	Last Post by JJohnston 03-05-2020, 09:54 AM
Oil cooler location by Gary Wallace Started by Gary Wallace, 03-02-2020, 03:07 PM	6 responses 154 views 0 likes	Last Post by svyolo 03-03-2020, 08:57 PM
VR3 4 place fuselage tubing kit by atcws Started by atcws, 03-02-2020, 09:43 PM	8 responses 227 views 0 likes	Last Post by atcws 03-03-2020, 07:41 PM
Flush bolts or pan head for cowling by Gary Wallace Started by Gary Wallace, 12-07-2019, 09:56 AM	8 responses 269 views 0 likes	Last Post by Scout 03-03-2020, 05:10 AM
Material Question by bpaynebearhawk Started by bpaynebearhawk, 02-04-2020, 06:52 PM	13 responses 437 views 0 likes	Last Post by Archer39J 02-22-2020, 08:30 PM
Vertical spacer bars on main spar by DesertBearhawk Started by DesertBearhawk, 11-26-2013, 03:09 AM	3 responses 167 views 0 likes	Last Post by Gary Wallace 02-20-2020, 08:45 PM
Help With Wing Rib Evaluation (a model) by jsuhre Started by jsuhre, 02-19-2020, 12:27 PM	4 responses 177 views 0 likes	Last Post by Chewie 02-20-2020, 12:31 AM
Handy Builder's Tip Video by alaskabearhawk Started by alaskabearhawk, 02-09-2020, 05:57 PM	7 responses 227 views 3 likes	Last Post by Bcone1381 02-16-2020, 06:46 PM
Painting fuel tanks? by alaskabearhawk Started by alaskabearhawk, 02-16-2020, 01:31 PM	2 responses 118 views 0 likes	Last Post by Battson 02-16-2020, 02:48 PM
Engine baffle seals by Gary Wallace Started by Gary Wallace, 02-13-2020, 04:53 PM	6 responses 246 views 0 likes	Last Post by Gary Wallace 02-14-2020, 08:46 PM
O-470 Engine Mount by rv8bldr Started by rv8bldr, 02-23-2016, 01:18 PM	12 responses 924 views 1 like	Last Post by Spokes 02-08-2020, 06:57 AM
Cowl filter tunnel 3 pieces? by Gary Wallace Started by Gary Wallace, 01-29-2020, 07:04 AM	12 responses 375 views 0 likes	Last Post by Gary Wallace 02-07-2020, 07:59 AM
Engine baffle clearance by Gary Wallace Started by Gary Wallace, 02-03-2020, 06:52 PM	2 responses 115 views 0 likes	Last Post by Gary Wallace 02-04-2020, 06:10 AM
Tip Ribs by 75Fox Started by 75Fox, 01-30-2020, 08:48 AM	6 responses 118 views 0 likes	Last Post by jaredyates 01-30-2020, 10:26 AM
Hinge part number cowl doors by Gary Wallace Started by Gary Wallace, 01-28-2020, 06:17 PM	5 responses 109 views 0 likes	Last Post by Gary Wallace 01-29-2020, 08:55 AM
Camlocs for cowl doors by Gary Wallace Started by Gary Wallace, 01-27-2020, 06:53 PM	5 responses 204 views 0 likes	Last Post by Bcone1381 01-29-2020, 06:49 AM
Bottom cowl skin aluminum by Gary Wallace Started by Gary Wallace, 01-16-2020, 05:52 PM	9 responses 306 views 0 likes	Last Post by Gary Wallace 01-21-2020, 07:46 PM
Aileron Counterweight Tube by alaskabearhawk Started by alaskabearhawk, 11-08-2019, 08:24 PM	13 responses 421 views 0 likes	Last Post by Chewie 01-11-2020, 04:19 PM
Model B Aileron Rib Length Discrepancy by Weldingiron Started by Weldingiron, 01-06-2020, 09:24 PM	6 responses 121 views 0 likes	Last Post by Weldingiron 01-07-2020, 01:49 PM
Center rib stiffener angle orientation by kilohotel Started by kilohotel, 01-05-2020, 09:07 PM	2 responses 125 views 0 likes	Last Post by kilohotel 01-07-2020, 11:59 AM
Drawing my B model in Solidworks. by Mikeos98 Started by Mikeos98, 12-19-2019, 03:26 PM	32 responses 1,139 views 2 likes	Last Post by spinningwrench 01-06-2020, 10:26 PM
Aileron & flap trailing rib fit to spars by kilohotel Started by kilohotel, 01-03-2020, 01:01 PM	2 responses 138 views 0 likes	Last Post by kilohotel 01-05-2020, 02:59 PM
Pocket rib length by Erik Started by Erik, 12-31-2019, 01:04 PM	6 responses 159 views 0 likes	Last Post by marcusofcotton 01-01-2020, 08:43 PM
Short rib questions by Erik Started by Erik, 12-27-2019, 05:51 PM	7 responses 207 views 0 likes	Last Post by johwiltb 12-29-2019, 07:22 PM
Solidworks or AutoCAD Bearhawk 4-place by NSLaw Started by NSLaw, 02-28-2019, 10:32 PM	29 responses 1,237 views 0 likes	Last Post by zkelley2 12-20-2019, 01:21 AM
T25 by Mikeos98 Started by Mikeos98, 12-19-2019, 01:37 PM	2 responses 123 views 0 likes	Last Post by Mikeos98 12-19-2019, 03:23 PM
Bend Radius by 75Fox Started by 75Fox, 12-03-2019, 11:07 PM	3 responses 133 views 0 likes	Last Post by nichzimmerman 12-04-2019, 12:11 PM
Prop extension or not? by Gary Wallace Started by Gary Wallace, 11-24-2019, 06:45 PM	11 responses 272 views 0 likes	Last Post by Battson 11-26-2019, 05:15 PM
Cowling bottom carb cutout by Gary Wallace Started by Gary Wallace, 11-23-2019, 02:45 PM	1 response 152 views 0 likes	Last Post by Jim Douglass 11-25-2019, 01:15 PM
pcu5000x spec sheet by Gary Wallace Started by Gary Wallace, 11-21-2019, 02:39 PM	16 responses 225 views 0 likes	Last Post by Archer39J 11-25-2019, 10:43 AM
B Model Wing Specs by Weldingiron Started by Weldingiron, 03-10-2019, 10:48 PM	17 responses 982 views 0 likes	Last Post by sjt 11-17-2019, 06:22 PM
Nose rib technique by nborer Started by nborer, 10-30-2019, 09:55 PM	14 responses 269 views 0 likes	Last Post by Chewie 11-04-2019, 11:52 AM
Normalized 4130 by 75Fox Started by 75Fox, 10-31-2019, 11:35 PM	3 responses 154 views 0 likes	Last Post by 75Fox 11-01-2019, 02:17 PM
Rain Gutter by alaskabearhawk Started by alaskabearhawk, 06-20-2019, 09:34 PM	5 responses 338 views 0 likes	Last Post by Gerhard Rieger 10-26-2019, 02:37 AM
Recommended. 375 drill bit for wing spars by Gary Wallace Started by Gary Wallace, 10-23-2019, 03:53 PM	7 responses 165 views 0 likes	Last Post by geraldmorrissey 10-24-2019, 08:49 PM
T3 Tailwheel Suspension Mount by alaskabearhawk Started by alaskabearhawk, 10-20-2019, 09:36 PM	13 responses 312 views 0 likes	Last Post by alaskabearhawk 10-23-2019, 11:30 PM
Backing plate position by Wes Helm Bearhawk 1209 Started by Wes Helm Bearhawk 1209, 10-20-2019, 02:56 PM	3 responses 93 views 0 likes	Last Post by Wes Helm Bearhawk 1209 10-20-2019, 06:24 PM

Previous 1 2 3 4 10 template Next

No topics found.

Mark This Channel Read

Working...

Announcement

Bearhawk 4-place Plans Build