Wing Root Panel question

[Utah-Jay]

OK, I was playing kindergarten today with my paper and scissors and have a question. What are you guys doing for the aft fuel line going into the wing root panel area?

The third photo shows the area in question in red. The black line will be the termination of the panel, I did not cut it before I left today. The yellow lines are a potential cut out area to allow for the fuel line to come from the wing.


8F89A5C2-C865-4A68-847C-A84E830B33E5.jpg

E4D9CF9E-C9E6-4B3E-94C3-0BB3057E98EB.jpg

11BD4BB3-957B-4F70-BB34-E69848415313.jpg

[N942VT]

Pic 198.jpg Here you go

[Battson]

I made mine with lightweight ceconite fabric, which was a light and easy solution. It just wraps over the fuel line. It still looks great 10 years later.

[Utah-Jay]

I made mine with lightweight ceconite fabric, which was a light and easy solution. It just wraps over the fuel line. It still looks great 10 years later.

I am going to put my headset jacks up there, so need the sheet metal.

[Battson]

I am going to put my headset jacks up there, so need the sheet metal.

I have my jacks on fabric panels, you just need a little aluminum back plate to secure them, fabric over the top