Titanium Bucking bar

[Tallow98]

Hey Guys:

Have ya'll used a titanium bucking bar. Is it better or not? Is it worth the money?

[Bradrock]

Without doubt worth the money. I have a small 4" bucking bar that surpasses all of my various steel bars. It sounds hard to justify the expense until you have used one after using regular steel.

[Chewie]

Seems like titanium would be too light... You mean tungsten?

[marcusofcotton]

Tungsten bucking bars are indeed very nice.

[Bradrock]

Well spotted Chewie - tungsten is indeed the correct material. :-)

[Yadama]

Guys

I am getting close to the point where i will need one. Where is the best place to source a tungsten bar?

Yadama

[Matt K.]

Guys

I am getting close to the point where i will need one. Where is the best place to source a tungsten bar?

Yadama

Vansairforce classifieds.

[alaskabearhawk]

Brown Tool.http://www.browntool.com

[Tallow98]

Yep, I meant tungsten. Now Which shape or design is best.

[N3UW]

I purchased mine from http://www.tungstenbuckingbars.com . They are also on ebay and i found their prices including shipping there were cheaper. I use two. the one I used for 90% of the time is a ETBB13 which is 4"x1"x0.625". One end is square and the other is angled. I also have a 1"x1"x2.25" where one end is square and the other has about a 20deg angle. I probably could have done without the 1"x1" bar. On ebay I paid $117 including shipping.

[geraldmorrissey]

I want a depleted uranium bucking bar.
Gerry
Patrol #30 WIngs

[Yadama]

Thanks Guys

Yadama

[Chewie]

Just came across this:

http://www.browntool.com/Default.aspx?tabid=344&CategoryID=391&Level=a&ProductID=2634