Kit #7 arrived

[Utah-Jay]

Chewie, glad you like the build progress. Lots of progress the past two days. Yesterday was a lot of small stuff so did not take any photos.

Yep, 3/16’s and corrected

[Chewie]

3/16"
I am enjoying pictures of your build, not only because of your enthusiasm but also I like seeing how the factory did their various weldments.

[Utah-Jay]

Amazingly I spent most of the day on my trim torque tube and spacers. The spacers are perfect, not one bit of side to side movement. It was a long process to get all the holes drilled, I started small and upsized a few times to try to keep things tight. FYI, the AN3 bolts are obviously just for fitting so don’t judge me

E3B4B4FB-0826-44D2-93AA-762B4BD51C12.jpeg667778DD-9754-475D-874C-535BE15CABAE.jpeg78F68D49-C715-4644-AB71-48B94F4DDE74.jpeg

[Utah-Jay]

Thanks Rob

I attached a photo of the gap I currently have, it is 3/16’s on all 4 gaps. I will be covering with Oratex, not sure if that is a factor or not.
1D708F83-E76C-4C24-A112-7BAF241C4C14.jpeg

[robcaldwell]

Be sure to check to see if your trim tabs will fit AFTER fabric is applied. I encountered an unexpected fix after covering mine. https://bearhawk4place.blogspot.com/...trim-tabs.html