Bearhawk Aircraft Bearhawk Tailwheels LLC Eric Newton's Builder Manuals Bearhawk Plans Bearhawk Store

Announcement

Collapse
No announcement yet.

Left window stand offs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Left window stand offs

    Would someone with a recent bh5 qb measure the window standoffs for the rear d window on top? There are 2 and I am thinking mine are short.
    Thanks
    Travis M
    Kentucky
    Bearhawk 5 Quickbuilt Kit Plane #5041
    Received December 2022

  • #2
    Kit #14, not sure if that is recent enough.

    First picture is top front (back a little to maybe give some perspective), then closeup of top front, then top rear, then bottom
    You do not have permission to view this gallery.
    This gallery has 4 photos.
    Last edited by Ryan Koeneke; 05-10-2023, 03:50 PM.

    Comment


    • FFTravism
      FFTravism commented
      Editing a comment
      Thank you that is exactly what I needed. Mine is #21 so not too far from yours.
      Travis

  • #3
    Were you asking about this because it doesn't seem like you need the joggle piece that Colby and Colin used between the back left window and the D shaped back left window? It looks like on mine they are pretty much flush.

    And if so, did you just splice in a straight piece of aluminum to tie the two windows together?
    Last edited by Ryan Koeneke; 06-10-2023, 09:12 AM.

    Comment


    • #4
      Pictures for better clairfication
      Attached Files

      Comment


      • #5
        Yes exactly. Top seems flush on mine and the bottom could use a little joggle.
        Travis M
        Kentucky
        Bearhawk 5 Quickbuilt Kit Plane #5041
        Received December 2022

        Comment

        Working...
        X