Aileron and flap hinge closeout

[Wmilbauer]

I saw or read something on close out of the openings of the hinge points on the aileron and flaps but I am unable to locate anything covering that subject a little help would be appreciated.

[Bcone1381]

I think your taking about the hinge pocket cover plates.

https://bearhawkforums.com/forum/safety/18006-single-flap-locked-down-hinge-pocket-cover-jam

http://bearhawksafety.com/Patrol/september2015.html

[rodsmith]

Which model are you building? The dimensions for the covers for the original 4-place wings are shown in 1st quarter 2006 newsletter. If you can't access it, talk to Jared Yates. Can't tell you if Patrol and B Wing are the same. Be sure to read the safety notice Brooks referenced above. This is a good place to remind builders/flyers to occasionally check the bearhawk safety website for engineering changes. DSCF1010.JPG

[Wmilbauer]

Thanks, I will contact Jared.

[rodsmith]

Thanks, I will contact Jared.

I didn't notice earlier, if you read down through the thread that Brooks first link takes you too, Jared posted the page from the newsletter with the cover plate dimensions.