stinger
Reaction score
145

Profile posts Latest activity Postings About

  • If the front/rear spar holes are not colinear, then when mating the wings to the fuselage the wing dihedral cannot be adjusted independently of the angle of incidence without putting a "bind" on the attachment bolts.

    Angle of incidence and dihedral would need to all be set at the same time prior to the final reaming of the mating holes.

    Something to keep in mind when the wings get mated to the fuselage.


    Perhaps the offset is small enough to not be a concern but if that's the case, then why have the offset at all?

    The various "How to mate the wings?" write ups set the angle of incidence first and the dihedral second which would only be correct if the front/rear spar attach bolts are in line and thus work as a hinge.

    Mysteries..........
    stinger
    stinger
    BTAZ , I take it you are building the LSA . As per Bob Barrow the wing spar bolt attach holes should NOT line up on this wing , it will not produce the correct are foil . One must use the Mylar drawing C/L . Stinger
    I am curious as to the extra fuselage member you added.

    BTAZ
    stinger
    stinger
    We are building two aircraft . Stinger
  • Loading…
  • Loading…
  • Loading…
Back
Top