Back in the Game

PropMan

Well-known member
Well a few years ago i sold my LSA quick build wings and bought a flying Rans S7s. Wasn't making any progress on the build, life got in the way, lost both my parents, stuff!

Had a great time flying the Rans 190 hours in 2 years, trip to Johnson creek, Fun. I learned what i wanted in a plane and didnt want to change up the S7 so i decided to sell it and build an LSA to include my wants.

Taking delevery of a Quick build fuselage in the near future, soon as i can arrange picking it up!

Looking forward to the ride!!!
 
I learned what i wanted in a plane and didnt want to change up the S7 so i decided to sell it and build an LSA to include my wants.

Taking delevery of a Quick build fuselage in the near future, soon as i can arrange picking it up!

Looking forward to the ride!!!

Tell us what you mean by this. What does the LSA give you that is absent in the S7?
 
Tell us what you mean by this. What does the LSA give you that is absent in the S7?

Don't get me wrong, I thoroughly Enjoyed the S7.
Many small things added up to this decision.
1. I didn't build the S7 , so I didn't have the Repairman Cert.
2. I can build the LSA for a min of 20K less than i sold the S7 for.
3. LSA Climbs much better(1500fpm) on the same 100HP Vs. (900-1100fpm)
4. LSA is a bit faster(5-10mph)
5. Holds more gas, 28 gallons vs 26
6. Higher gross wt.
7. I wanted a bit different panel, and that would mean reworking the entire panel on the S7.Possibly the whole electrical system


For me the big ones are the 20K in my bank, Repairman cert, and the Panel i want. all the other are just icing on the cake (-:
 
Last edited:
Sounds good. I would point out though that the larger fuel capacity will be needed, as nothing comes close to a Rotax 912's fuel burn. My A-65 in my T-Craft I flew for over 100 hours, had almost as good but not quite, and when all was said and a lot less thrust. The higher gross weight of the LSA is for sure a real inducement to trade up, assuming you need it. The repairman cert is a huge deal also. Sounds like you came out OK financially on the Rans, that's always a good thing! And it's always better to "roll your own" versus something that someone else built just a lot more satisfying . Though I have had no real issues with the MIG welded Rans air frame on my S-7S, I do like the idea of the gas welded one on the LSA a bit better.
 
Hey, what's this? The LSA now comes with that nifty castor wheel stand thing?

These kits just get better and better! ;)
 
Yeah, well - I saw a pretty recent BH four-place kit the other day, and as I looked at it, all I could think about was how many hours I'd spent doing jobs that now are done for you straight out of the kit :-) I felt like some old guy complaining about how easy kids have it nowadays!

Is there a thread somewhere on this forum "How to explain to my family that I'd like to build a second bearhawk" ?
 
James, I feel your pain. I built an early RV6. Then pre punch hole came out, then matched hole. LOL

Glad I'm on the receiving end of kit upgrades this time!
 
Bits and pieces, Got the gear fit, some controls and the rudder. need to order a couple parts for the wheels and they will be installed. Also waiting on the tailwheel!
 

Attachments

  • photo8108.jpg
    photo8108.jpg
    1.4 MB · Views: 2
Started on the three blade prop for my LSA and heres a shot of the makeshift press to assemble the shock struts
 

Attachments

  • 20201123_180818.jpg
    20201123_180818.jpg
    2 MB · Views: 2
  • 20201123_195215.jpg
    20201123_195215.jpg
    1.9 MB · Views: 2
Great progress! In watching the dates on your posts, how long after you sent your deposit in did it take to take delivery?
I like the aft A-frame gear leg structure, meant for fabric/fairing the rear, a very nice touch and one many who cover their gear neglect to do (not me.)
 
They had a Quick build kit in stock. Got it in a couple days. Gonna get done asap, I'm missing having a flying plane something awful.
 
Yes sir, at least for a few more months, I'll be passing the craft on to others soon. been a great 12 years.
 
Spent an hour last night fitting and finding the parts for the Horizontal stab and elevator. waiting on tail wires, supposed to be here end of December. I was lucky enough to get a set from Steen Aero Lab
 

Attachments

  • 20201124_195109.jpg
    20201124_195109.jpg
    1.9 MB · Views: 2
Tailwheel came in, got it installed, really not much to it(the install that is) The tailwheel is awesome. Everything fits perfectly! 😀
 

Attachments

  • 20201130_200944.jpg
    20201130_200944.jpg
    2.2 MB · Views: 2
Last edited:
Another Big piece of the puzzle today. And Ordered an O200 from Bob too!
 

Attachments

  • 20201204_170014.jpg
    20201204_170014.jpg
    1.9 MB · Views: 2
  • 20201204_150721.jpg
    20201204_150721.jpg
    2.7 MB · Views: 3
Nothing better then a shipping crate that can be re-purposed: lot's of good sq tube there. Those wings look great.
 
Wings are started, working on the right one first. Learning curve on this one so hope the left one is faster. Spent a little time laying out the panel. Got some heavy metal to make life easier too!
 

Attachments

  • 20201212_142929.jpg
    20201212_142929.jpg
    1.7 MB · Views: 2
  • 20201209_204122.jpg
    20201209_204122.jpg
    2.2 MB · Views: 2
  • 20201208_143930.jpg
    20201208_143930.jpg
    2.1 MB · Views: 2
  • 20201212_193937.jpg
    20201212_193937.jpg
    2 MB · Views: 2
Last edited:
Round gauges?? Say it isn't so, that's so 20 th. century! The only round thing in my S-7S's panel since a re-do a few years ago, is the hour meter. I use this thingie for my primary flight instruments. https://grtavionics.com/product/mini-x-efis/ I found that one huge advantage was when I pull the GRT unit, the hole is big enough to stick my hand in behind the panel, and those bigger displays would be even better. This is one thing about these newer displays that i never have heard mentioned, they are more user friendly in that regard!

One thing about no flaps I could get to like:no leakage/drag while flying, just a big smooth airfoil. Are those rivet buckers in the third pic?
 
Been there, had a Dynon Skyview in my S7. All is good until the elections stop flowing.
Going with an iFly in the center, Trig radio an transponder. One of the round 3.25 holes is for Electronics International CGR30 engine monitor. Yes, gonna cut and make an access hole where the tablet mounts
 
My best friend's CH-750 has a Dynon Skyview (old version). He kept the wiring long enough that he can remove it an lay it on the panel shroud / boot cowl. It gives him all the access to the back of the panel that he needs. I'm planning a GRT Sport EX (7") for my panel.
 
Build it like YOU want it. You can maintain and access behind your panel and have round dials. Here is what i have so far.
The dark gages are a Garmin G5 & Electronics International CGR30P.

(I am a bit critical of my electrical panel. I can change some things around to save space and use fewer switches. It was interesting building it then picking it up and thinking about loosing a bit of weight by having, for example, the NAV and Strobe lights on single three position switch. But, am I going to ever finish this thing? As Mark Goldberg says "Perfectionism is the enemy of completion."

Click image for larger version  Name:	Screen Shot 2020-12-13 at 12.40.50 PM.png Views:	0 Size:	756.0 KB ID:	60216Click image for larger version  Name:	Screen Shot 2020-12-13 at 12.42.02 PM.png Views:	0 Size:	494.2 KB ID:	60217

Click image for larger version  Name:	Screen Shot 2020-12-13 at 12.40.50 PM.png Views:	0 Size:	756.0 KB ID:	60216
 

Attachments

  • Screen Shot 2020-12-13 at 12.30.41 PM.png
    Screen Shot 2020-12-13 at 12.30.41 PM.png
    859.8 KB · Views: 0
Last edited:
Not having seen an LSA kit or plans I'm wondering how the trailing edge is finished. I see holes in the top skin at the trailing edge. Are the skins rivited at the trailing edge instead of having a folded trailing edge like the aileron? I like your choice of the EI CGR 30 engine monitor. A friend put one in his super cub, it really cleaned up the panel and is very visible even in direct sunlight.
 
Yes, the trailing edges are riveted. The EI CGR 30 seems to be a perfect fit for how I want the panel to work out. Has good reviews also
 
I love my Ifly GPS, kind of hard to beat the simplicity of just pointing at the screen and holding for a second or two, and then have it ask if you want to go there! Especially handy of course if you're not going to an established airport with a identifier etc. I have found them and GRT great companies to deal with, real people at the helm. I'll try and remember next time I see a round hole in a panel, it doesn't mean an old school steam gauge is going there! I am real interested in your progress, since you flew an S-7 earlier I am looking forward to your comparisons.
 
Looks like I'm going from 4 3.25" holes to 2, I just found the UAVIONIX AV-30-E PRIMARY FLIGHT DISPLAY , another round instrument, lol.
 

Attachments

  • 11-17556a.jpg
    11-17556a.jpg
    33.8 KB · Views: 2
Last edited:
Fitting Right wing fuel tank tonight, made the big hole for the filler cut 0-: Worked out (-:
Waiting on anti chaff material, figure a couple more hours of work and the tank will be done!
 

Attachments

  • 20201214_204229.jpg
    20201214_204229.jpg
    1.7 MB · Views: 2
  • 20201214_193033.jpg
    20201214_193033.jpg
    2 MB · Views: 2
  • 20201214_204411.jpg
    20201214_204411.jpg
    1.8 MB · Views: 2
Last edited:
  • Like
Reactions: Nev
Been busy finalizing the sale of my business, so not a lot done on the LSA lately. Plus the Blizzard of 2021 here in Texas didn't help (-:

Made good progress the past few days tho, Decided it would be helpful(more efficient) to build stands for a rotisserie. This is the best decision I've made on the project as of yet. Plus i can adapt it for the fuselage. Ran the wire for Nav/Position/Strobe, installed the aileron pulleys and cable, then drilled the aileron to the wing, Hope to finish this wing by end of January and get the other done a few weeks later. Build On!!!!
 

Attachments

  • 20210117_113914.jpg
    20210117_113914.jpg
    1.8 MB · Views: 2
  • 20210117_125233.jpg
    20210117_125233.jpg
    1.9 MB · Views: 2
  • 20210118_185355.jpg
    20210118_185355.jpg
    377.2 KB · Views: 2
About 30 years ago I built what turned out to be a "universal" rotator. Various projects just need different attachments, but the two steel tripod stands adapt nicely. Some form of such a thing is a MUST in my book, the couple hours or less to cobble something up is more then compensated for down the road. These pictures highlight the simplicity of no flaps, something this flapped pilot is still struggling with, but it's sure hard to beat "simple and light."
 
Right wing near complete, a couple more hours. Pulling this plastic was almost 3 hours, dang, glad that's done (-;
 

Attachments

  • 20210128_222132.jpg
    20210128_222132.jpg
    1.9 MB · Views: 2
  • 20210128_222109.jpg
    20210128_222109.jpg
    1.8 MB · Views: 2
rodsmith , Yes the plans for the LSA trailing edge are as previously stated, however I did not have access to a large brake so I used the trailing edge material as you mentioned. Stinger 1980-01-01 LSA Stuff Oct 2017 025.JPG
 
Those ailerons look huge in chord, what do they measure? Just eyeballing them to my RANS.....I really like the way Bob designs his control surfaces, BIG.
 
When you see the Patrol wing in person, the whole thing looks HUGE compared to the wings on my RANS. Similar wing loading, but carrying 1.5X the gross weight... Everything is massive compared to the S-6.
 
Those ailerons look huge in chord, what do they measure? Just eyeballing them to my RANS.....I really like the way Bob designs his control surfaces, BIG.

Cguy- 16.5" x 68.75 is what the aileron measures. I don't recall what the S7 is but keep in mind the LSA has a 33' wingspan, that's a bit over 3' more than the 7.
 
Square foot of wing area is a big factor in just about all areas of flight. Normally - the additional wingspan and wing area compared to a Rans would mean the Rans should be faster in cruise than a BH LSA. That would be a downside to Bob's design. But the opposite is true. It is due to Bob's design ability. Mark
 
WOW! My eyeballs were calibrated correctly, those are huge. Short of booting up and running through the snow drifts to the hangar, I'm going to guesstimate the chord on my 7 as 8-9 ". I think my elevator is closer in chord to those! I totally agree Mark, he pulls it off performance wise so why not go big. I remember being similarly stunned when eyeballing the first Bearhawk I saw, lots of control at very low speeds is what it all says to me.
A DAY LATER EDIT: The 7's ailerons are 7 to 9", tapered, and 66" long.
 
Last edited:
Bob's designs are pretty amazing. The Bearhawk LSA wingspan is almost 4 ft longer (34 ft versus 29.25 ft for the RANS S-7), and has a LOT more wing area (170 ft[SUP]2[/SUP] versus 147 ft[SUP]2[/SUP] for the RANS). And given they share the same gross weight (1320 lbs), the wing loading for the BH LSA is 14% lower (~7.7 lbs / ft[SUP]2[/SUP], versus ~8.8 lbs / ft[SUP]2[/SUP] for the S-7).

Given all that, you're think the BH LSA would be much more of a "kite" in turbulence, and be much more "draggy" than the S-7, but that's not the case, at all. The BH LSA's top speed is actually 10 mph faster (140 vs 130), and the cruise speeds are likewise at least as good, if not faster (110-125 mph vs 105-110 mph for the S-7). All that is a testament to Bob's design skills – especially when it came to the all-critical airfoil selection process, and the attention he paid to reducing fuselage, gear, and wing strut drag... The takeoff and landing performance is close enough between the two designs that the pilot probably makes more difference than the airplane itself...

One other huge difference: The BH LSA is designed and rated for 1500 lbs max gross (though often certificated at 1320 to meet the LSA specs). The S-7 is maxed out at 1320, and Randy Schlitter would NOT be happy if you arbitrarily raised the max gross above that limit. Thus the BH LSA has a LOT of "reserve" strength if flown as an LSA, or could be licensed at the higher gross weight if you don't need to meet the Light Sport rules.

All in all, the BH LSA is one heck of an airplane!
 
Jim, let me touch on some of your observations . Regarding the Kite effect, for good or bad I went flying in a 25mph ground wind and 45 at 3000ft my air speed showed 132 down wind and 62mph into the brisk flow . The LSA handled very well as I had full control. My only thoughts were returning to my runway 36 with the 25mph blowing from the west but it was none eventful ducking under our tree line and grass strip.. Stinger
 
Stinger, I hope I didn't come across as saying the LSA was "kite-like" - I was intending the exact opposite. With what I know now, I'd pick the LSA as my personal "favorite" in the BH line, with the Patrol coming in a close second - almost a dead heat... But I'm cheap, so the 100HP fuel flow would sway my decision.
My RANS S-6 Coyote is a nice airplane, but compared to the BH LSA - well there's really no comparison... The little Coyote is nowhere near as robust of an airplane. But it IS inexpensive! LOL
 
Bunch of Good Stuff came in last week ! Radios and such. Changed my mind on instruments too. Ordered a GRT Sport 10.1 EFIS with their engine monitor, that'll be here in a few weeks. Then I can start wiring up the panel (-:
 

Attachments

  • 20210213_172329.jpg
    20210213_172329.jpg
    2 MB · Views: 2
I really like the GRT stuff I have, and being a native Michigander feel good about sending them my money. If you mean the engine monitor I think you do, the concept is brilliantly simple. Once setup (and that's so easy to do, you can actually change the parameters in flight) a panel mounted light glows steady if all is AOK. If it starts flashing, you have reached the upper limit of a particular function. This frees you from continually scanning multiple readouts, it's an idiot light in effect, but a good one, freeing up your attention for flying the darn plane. I have had mine flash one time, and it worked. I blew a seam in my radiator (Rotax, 2600 hours, a seam got "work hardened" due to expansion and contraction, it was a Chinese core, not now) on climbout in 8 degree temps, the flashing light got my attention instantly, and I landed without further damage.
 
I really like the GRT stuff I have, and being a native Michigander feel good about sending them my money. If you mean the engine monitor I think you do, the concept is brilliantly simple. Once setup (and that's so easy to do, you can actually change the parameters in flight) a panel mounted light glows steady if all is AOK. If it starts flashing, you have reached the upper limit of a particular function. This frees you from continually scanning multiple readouts, it's an idiot light in effect, but a good one, freeing up your attention for flying the darn plane. I have had mine flash one time, and it worked. I blew a seam in my radiator (Rotax, 2600 hours, a seam got "work hardened" due to expansion and contraction, it was a Chinese core, not now) on climbout in 8 degree temps, the flashing light got my attention instantly, and I landed without further damage.

I opted for the Sport 10.1 EFIS and have the engine info on that screen to declutter the panel. And yes they have great features on the engine monitor, plus a reasonable price for the equipment.
 

Attachments

  • Sport 10.1.PNG
    Sport 10.1.PNG
    435.7 KB · Views: 1
I'm preparing to upgrade my panel on my RANS S-6ES to add a GRT EFIS as well. But I don't have room for the 10" version, so I've been going back and forth about whether I wanted to go with the Sport EX (7" display) or the Mini-AP (4" display – just barely larger than a 3 1/2" instrument it would replace). After doing some in-depth wiring planning (assigning serial port connections to all the various functions), it turns out that I would save less than $200 by going with the Mini, versus the Sport EX. So now that decision has been made. I will integrate my current GRT engine monitor (1-wire connection) to the Sport EX, and have graphical display of all the engine-related stuff as well.
To make panel access easier, I'm going to cut an oversized rectangular section out of the existing panel, and use a sub-panel that will contain the GRT and a couple of other instruments (Belinte Radiant Instruments "Angle-of-Attack" and "Digital Altimeter"), plus the "Low Fuel" and "EIS" warning lights. I'll post a "mockup" picture if/when I ever get my Internet connection up and running again.
 
I replaced my steam gauge ASI, VSI, Altimeter and compass (a compass isn't needed if you don't night fly I believe, after realizing I had NEVER looked at the compass in the last 25 years in several planes, since GPS came out, I yanked mine) and replaced them all with a GRT Mini. It works great, saved a LOT of weight and to my surprise there was no period of getting used to it, it felt "right" first flight. Plus, I can now fly blind, using the artificial horizon and turn indicator. Just kidding, but it's fun to play around with it sometimes, in VFR conditions.
 
In the US, 14CFR 91.205 (b)(3) requires a magnetic direction indicator (some folks mistakenly think this means a compass) for all VFR flight, day and night. This makes sense, because a GPS can only derive your track across the ground. A fancy GPS can take your magnetically-derived heading and compute winds and drift. In our plane, I don't have a panel-mounted compass, but instead use a magnetic sensor that displays its results on the instrument screens.
 
More happenings, Finally!!!!

The Texas Winter Blizzard of 2021 put a big halt on my build! No power for 5 days in sub zero temps and 12 inches of snow, unheard of around these parts. Got all kinds of trees and plants dyeing off now.

Back at it. Nut plates on inspection covers, Fuel tank straps, cables and pullies. These pics will look familiar but not. Left wing well under way. Hope to be done in a week or so.

Side note, Weather was in the 80s today and took the Legal Eagle out for a spin (-:
 

Attachments

  • 20201111_174406.jpg
    20201111_174406.jpg
    1.9 MB · Views: 2
  • 20210110_155045.jpg
    20210110_155045.jpg
    1.7 MB · Views: 2
  • 20210110_154630.jpg
    20210110_154630.jpg
    2.1 MB · Views: 2
  • 20210315_200859.jpg
    20210315_200859.jpg
    2.2 MB · Views: 3
  • 20210315_200916.jpg
    20210315_200916.jpg
    1.3 MB · Views: 3
  • 20210315_200926.jpg
    20210315_200926.jpg
    1.5 MB · Views: 3
I was in South Padre Island for the last 3 months, just left today. We were without power for 4 days, gas/diesel for a week, propane for almost 2 weeks, and groceries for about 10 days. Lots of fun.

Being in Texas with no energy is like? Unreal. Headed back to continue building starting today. I came here as a refugee from stupid. I almost was a refugee X 2. I am doing the paperwork to get residency here.

Not sure if I will finish my build in WA, or just get the engine mounted and move the whole project. It is easier to move with the engine mounted. I just need to cover the bottom of the fuse, and apply the seam tapes, and mount the engine.
 
Yeah, being stuck in sub-zero weather without power or water, and unable to run to the store for groceries for a few days gives one a whole new appreciation for the early pioneers who made their lives in Texas... I think people were a LOT tougher then – at least a lot tougher than I am! I complain when the A/C in my fifth-wheel camper won't cool the interior below 75º in the summer when it's 105º outside...
 
That picture of the fuel tank bay really shows off the height/depth of the wing chord, whatever the proper term is, looks really STOLLY.

While Texas was out of power, and their wind turbines in the news, our wind farms here were churning away, properly set up from the getgo to de-ice themselves. But, a lot of extra money to do so, and down there it didn't pencil out I guess. I never realized the water lines were run in the ceiling down there, been living in freezing climates too long I guess.
 
More goodies for the panel and fabbed the magnetometer tray.
 

Attachments

  • 20210329_201653.jpg
    20210329_201653.jpg
    1.4 MB · Views: 3
  • 20210329_195859.jpg
    20210329_195859.jpg
    1.3 MB · Views: 3
All my paint is here along with exhaust and got word the engine is being assembled. I'm running out of parts to order!!!
Finished drilling the aileron to the wing. Time to rivet bottom skins.

Oh yeah, went ahead and got a set of 850 tundras(-:
 

Attachments

  • 20210419_134548.jpg
    20210419_134548.jpg
    2 MB · Views: 2
  • 20210416_201730.jpg
    20210416_201730.jpg
    1.5 MB · Views: 2
  • imagejpeg_0002.jpg
    imagejpeg_0002.jpg
    214.3 KB · Views: 3
Spent a couple hours reworking the stringer standoffs and center support, which will now support the skylight, welded in new locations. Just need a few tabs to secure the rear track for the lexan.
 

Attachments

  • 20210531_194038.jpg
    20210531_194038.jpg
    1.3 MB · Views: 2
  • 20210531_194108.jpg
    20210531_194108.jpg
    1.4 MB · Views: 2
  • 20210531_194048.jpg
    20210531_194048.jpg
    1.5 MB · Views: 2
  • 20210531_194059.jpg
    20210531_194059.jpg
    1.4 MB · Views: 2
You probably know this, but those big skylights, like the S-7 has and I guess the BH LSA, has, are great, BUT....it's also nice to have a easy way to block some of the sun off you noggin. In my 7, I have a scrap of the foil bubble foil stuff insulation. Weighs nothing, free. I just put mine up for the summer a couple days ago, and wouldn't you know it as i was flying up a canyon i saw a plane's shadow, not mine, looked up, and couldn't see up! They make fancy pleated blinds, that quickly retract, but the foil stuff pops out pretty quick if needed also. Spring, fall, and winter I love the full skylight.
 
Yeah, with my S7 I enjoyed the vis, heat wasn't too bad. But I'm used to that here in Texas (-:
 
Making progress, seat bottoms covered with. 020 and backs .016 aluminum. ELT tray and antena bracket welded in place, and stringers cut and drilled to fit.
 

Attachments

  • 20210713_200911.jpg
    20210713_200911.jpg
    1.1 MB · Views: 3
  • 20210624_221209.jpg
    20210624_221209.jpg
    1.3 MB · Views: 3
  • 20210709_200338.jpg
    20210709_200338.jpg
    1.5 MB · Views: 3
  • 20210624_215408.jpg
    20210624_215408.jpg
    1.4 MB · Views: 3
  • 20210629_201201.jpg
    20210629_201201.jpg
    1.9 MB · Views: 3
2021 Oshkosh behind us and building in front! Gettin it done!
 

Attachments

  • 20210815_175142.jpg
    20210815_175142.jpg
    1.4 MB · Views: 3
  • 20210815_175158.jpg
    20210815_175158.jpg
    1.5 MB · Views: 3
  • 20210815_175258.jpg
    20210815_175258.jpg
    1.1 MB · Views: 3
Yeah, It's been a while since I've posted. Not a lot of progress since Oshkosh. But, with the grass not growing an dark coming early there's lots more time to build! Got the wings drilled to the fuselage, stringers drilled, fuel lines made up. Decided to use nut plates for floor attach, so that was done today. Also decided to paint the fuselage tubing a dark gray to match my selected paint, this meant taking everything off the fuse for prep an paint. did that today also, tomorrow will scuff and paint. If all goes well I will be working on the boot cowl, windows, door, next week. Made a short video of my mess (-:
https://youtu.be/4pUvzvyEGKU
 
Frank,
Would you mind sharing what equipment you ended up choosing for your panel? I saw that you are going with the GRT 10.1" display but not sure about the rest. Also, would you mind measuring the height of your LSA QB panel and sharing that dimension? From the plans, it looked to me like it was 10" but your layout makes me think it must me less than 10".
David
 
Frank,
Would you mind sharing what equipment you ended up choosing for your panel? I saw that you are going with the GRT 10.1" display but not sure about the rest. Also, would you mind measuring the height of your LSA QB panel and sharing that dimension? From the plans, it looked to me like it was 10" but your layout makes me think it must me less than 10".
David

David, I'm installing the GRT 10.1 Sport with synthetic vision option and their engine monitor, but will have the engine info talking to the Sport so to save panel space. Radios will be Trig TY92 and Trig TT22. Going to use breaker switches to save panel space also. The panel is 9" tall and the Sport needs 7" height for install, so it just fits. here's a pic of what i think the panel will look like.
 

Attachments

  • 20211112_081436.jpg
    20211112_081436.jpg
    1.1 MB · Views: 1
David, I'm installing the GRT 10.1 Sport with synthetic vision option and their engine monitor, but will have the engine info talking to the Sport so to save panel space. Radios will be Trig TY92 and Trig TT22. Going to use breaker switches to save panel space also. The panel is 9" tall and the Sport needs 7" height for install, so it just fits. here's a pic of what i think the panel will look like.

Frank, I've been looking at how the 7" GRT would fit. I've attached a layout that I did. This would use the basic engine monitoring option and no EIS.
 

Attachments

  • Panel.jpg
    Panel.jpg
    74.3 KB · Views: 0
I initially ordered the 7" but saw there was enough room for the 10.1 and changed my order. The larger screen is awesome, checked it out at Osh. With old eyes, I don't need glasses (-:
 
I forgot to go by the GRT booth at Osh this year. I'll have to remember to do that next year. With the 10.1, are the numbers actually bigger or is there just room for more information on the screen at the same time?
 
The numbers are the same or very close, but the maps and synthetic vision are larger. screen isn't as cluttered with all the info either.
 
After you have some flight experience with it, I'll ask you how you like the 10.1 GRT. I'm still two years out from making a decision. It appears that you decided not to rely on remotely controlling the transponder and radio through the GRT display since you are including the Trig control heads.
 
Finished the touch up paint on the fuselage tubing I wanted a darker gray. Started riveting nut plates on. Sure hope this is the last time the fuselage is bare bones. Excited I get to start installing permanent parts
 

Attachments

  • 20211113_164714.jpg
    20211113_164714.jpg
    1.2 MB · Views: 3
  • 20211113_164734.jpg
    20211113_164734.jpg
    1.4 MB · Views: 3
  • 20211113_164818.jpg
    20211113_164818.jpg
    1.7 MB · Views: 3
  • 20211113_173336.jpg
    20211113_173336.jpg
    1.1 MB · Views: 3
Got the stringers, formers, rear skylight attach installed, and started on skinning the door!
 

Attachments

  • 20211201_205130.jpg
    20211201_205130.jpg
    1.2 MB · Views: 3
  • 20211130_215822.jpg
    20211130_215822.jpg
    1.2 MB · Views: 3
  • 20211130_215758.jpg
    20211130_215758.jpg
    1.1 MB · Views: 3
  • 20211130_215736.jpg
    20211130_215736.jpg
    1.1 MB · Views: 3
  • 20211129_202851.jpg
    20211129_202851.jpg
    1.1 MB · Views: 3
I was concerned about that also, so I called ACK and explained my install and was told as long as the antenna is grounded to the tubing the entire fuselage will be the ground pane.
 
Left window assembly fit and drilled, started on the right window also!
 

Attachments

  • 20211205_151451.jpg
    20211205_151451.jpg
    1.2 MB · Views: 3
  • 20211205_151550.jpg
    20211205_151550.jpg
    1.4 MB · Views: 3
I am doing my doors at this time as well on a 4 place. I powered up the electrical system for the first time a few months ago. I have a GRT 10.1 Horizon. I have zero experience with any GA glass stuff, only airline and military. The little bit I played with it, it was extremely easy and intuitive. Of course, other than installation instructions, I haven't spent 2 seconds glancing at the operating instructions. But it seems pretty intuitive.
 
I had a Dynon Skyview Touch in my Rans S7s, Owned that plane for two years and sold it to finance the LSA. That was my first exposure to a Glass panel and started looking at my options for this build. Found GRT, ordered the Sport EX and about two days later upgraded to the 10.1 Sport, lol
I decided to get the plane covered and painted then do the panel install, so all my electronics are still on a shelf waiting on me.
 
I am a GRT guy all the way, love their stuff. I pulled all my old school round flight instruments out of the S-7 a few years ago, and replaced them with a Mini flight display, and saved some weight plus extra room in the panel. Put in a carbon fiber panel while I was at it, more ozs. saved. I have never missed my old steam gauges, not for a second, thought I would!
 
I thought I was going to by Advanced or Dynon, and still like their new wiring solutions. But talking to them, Garmin, and GRT (one guy, LOL), I went with GRT. Haven't flown it but playing around a bit, I really like it. I REALLY like the new Dynon/Advanced wiring solution that NEV used. That might have swung me the other way.
 
I'm finally back to working on the LSA!!! Again

After having Covid at Christmas and all the catch up from being down, progress is being made again. Fit and fabbed parts for the rear windows install, drilled in place, deburred. Just need to rivet in place.
Hope to be covering the fuselage soon. My reasoning is painting in an open hangar is best around April in these parts.

Figure I'll get the fabric and paint done on the fuselage then do boot cowl, electrical, and engine install.
 

Attachments

  • 20220210_190908.jpg
    20220210_190908.jpg
    860.8 KB · Views: 2
  • 20220210_190901.jpg
    20220210_190901.jpg
    875.9 KB · Views: 2
  • 20220210_190852.jpg
    20220210_190852.jpg
    917.2 KB · Views: 2
  • 20220210_190833.jpg
    20220210_190833.jpg
    933.8 KB · Views: 2
  • 20220210_190823.jpg
    20220210_190823.jpg
    1.1 MB · Views: 2
  • 20220210_190816.jpg
    20220210_190816.jpg
    1.1 MB · Views: 2
I'm finally back to working on the LSA!!! Again

After having Covid at Christmas and all the catch up from being down, progress is being made again. Fit and fabbed parts for the rear windows install, drilled in place, deburred. Just need to rivet in place.
Hope to be covering the fuselage soon. My reasoning is painting in an open hangar is best around April in these parts.

Figure I'll get the fabric and paint done on the fuselage then do boot cowl, electrical, and engine install.

One thing I would have done differently on mine(for the rear window frames)is to put the rivet shop head(the end you upset) on the inside instead of the outside. When I shrank the fabric, it touches the end of the rivet and show up as small bumps in the fabric. If I were to do it again, I would use flat head rivets installed from the outside.
 
One thing I would have done differently on mine(for the rear window frames)is to put the rivet shop head(the end you upset) on the inside instead of the outside. When I shrank the fabric, it touches the end of the rivet and show up as small bumps in the fabric. If I were to do it again, I would use flat head rivets installed from the outside.

Is this a cosmetic issue or have you had wear in those areas? Thanks for the heads up
 
Only cosmetic. I noticed it was going to be there as soon as I started shrinking the fabric so applied some anti chafe tape to take care of any possible wear.
 
Lots of parts going back on for what I hope is the last time, prepping for Fabric covering soon.

Also doing a bit of weight reduction, shaving off ounces hoping to lose a few pounds in the end. I wanted a removable rear control stick, so why not make it aluminum, 2.1 ounces less than 4130. Drilling lightning holes where possible, using thin washers, shortest possible bolts, clevis pins instead of bolts where shear loads allow.
 

Attachments

  • 20220215_194843.jpg
    20220215_194843.jpg
    951.6 KB · Views: 3
  • 20220215_194921.jpg
    20220215_194921.jpg
    1.1 MB · Views: 3
  • 20220215_194954.jpg
    20220215_194954.jpg
    1 MB · Views: 3
Last edited:
Back
Top