Bearhawk Aircraft Bearhawk Tailwheels LLC Eric Newton's Builder Manuals Bearhawk Plans Bearhawk Store

Announcement

Collapse
No announcement yet.

Carb flange to airbox gasket???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carb flange to airbox gasket???

    I'm wondering if and what folks have done for a gasket between the bottom carb flange and the airbox?? I've looked where I know (very limited) for a gasket. This would be for a Marvel Schebler MA-4-5.

    Any leads or suggestions greatly appreciated.
    Happy 4th to all!!

    Thanks too much,
    John Bickham

    Los Lunas, NM Mid Valley Airpark E98
    BH Plans #1117
    Avipro wings/Scratch
    http://www.mykitlog.com/users/index....er&project=882

  • #2
    I purchased a roll of cork rubber from the local auto parts store. It is around 1/16" thick. Placing the fab top on the cork, I was able to trace out the pattern and cut it out with scissors. Works great!

    Comment


    • #3
      Should be this one.
      Acs Part # 06-02143

      Comment


      • #4
        Thanks. I'll try that.
        Thanks too much,
        John Bickham

        Los Lunas, NM Mid Valley Airpark E98
        BH Plans #1117
        Avipro wings/Scratch
        http://www.mykitlog.com/users/index....er&project=882

        Comment

        Working...
        X