Advice needed - fuel flow divider

[Nev]

My fuel flow divided has got two ports labeled Inlet and Gage. Inlet is self explanatory. Presumably gage is for a fuel flow gage, which I won’t need. Is it normal to thread a blank NPT in ?

Is it normal to run the fuel line from the servo to the flow divider, between the cylinders? It looks like a large grommet has been provided to do this.

Advice appreciated.

F621322A-1612-4E88-8FFC-4C5AC194964C.jpeg

[N942VT]

Yes and Yes

[Nev]

Thanks very much !

[Battson]

^ what he said, remember to cover the fuel line with a fire sleeve, and the other port is for a pressure gauge. Flow goes in series, pressure in parallel.

[Nev]

Great. Ordered the fuel lines with fire sleeves today.