Brake Pedal Restrictor AD

[BrokenStraw]

I reviewed the brake pedal restrictor AD that was recently posted but am having difficulty understanding how to install the restrictor plates on the backside of the brake pedals. I would greatly appreciate if anyone can share some photographs that depict the proper installation. Thank you.

[Richard E]

Have I seen an AD regarding the brake pedals? I don't recollect it. I also cant find it. Have you got a link to it please.

[BrokenStraw]

https://static1.squarespace.com/static/658256462ce589380fa12dcf/t/685971b7122f8e3bbc482251/1750692280795/AD-002-2.pdf

It’s on the Bearhawk website under Resources tab.

[BrokenStraw]

https://static1.squarespace.com/static/658256462ce589380fa12dcf/t/685971b7122f8e3bbc482251/1750692280795/AD-002-2.pdf

[Richard E]

Sorry - Just found it.

https://static1.squarespace.com/static/658256462ce589380fa12dcf/t/685971b7122f8e3bbc482251/1750692280795/AD-002-2.pdf

We didn't need to do anything as we had the other cylinders.

[whee]

I installed Matco cylinders on my plane in 2019. During installation I noted the going “over center” risk of the Matco cylinders. To prevent this I simply slid a pice of fuel hose over the cylinder shaft that was of sufficient length to prevent going over center but not interfering with brake function. Easy peasy.