N22GM IO360 EFII Dynon

[way_up_north]

Wow!!!

takes your breath away....what a great looking machine...bravo sir....

when you have a chance ...please do a walk around video with the trials and tribulations you went through..

[rv8bldr]

Cool. That's good info. Thanks, Greg.

[Greg_Marlow]

The seat foam came from Oregon aero or the other major RV interior vendor, I cant remember which. Specifically, they are foam for the Rans S7S, which fit the Bearhawk frames pretty good. Then, a local auto upholstered took it from there.

[Aero_tango]

Wow, very nice. I like the look of the polished aluminum skin with your paint color scheme.
I'm curious to see what would be the speed gain with the wheel pants...
Mike.

[rv8bldr]

Spectacular ! Great job. Question: did you do your own seats? Do you have a pattern for the foam? I really like what you have there....

Cheers

[Greg_Marlow]

Well, there's a couch, recliner and TV in my hangar, so does that count? ☺️

[Greg_Marlow]

Thanks Mark. Couldn't have done it without your help.

[Greg_Marlow]

Yes, a 6 gallon tank on the bulkhead wall.

[Mark Goldberg]

Very nice Greg. Your BH turned out beautiful. Congratulations. Mark

[svyolo]

Beautiful.

[CharlieZulu]

Very nice Greg! I'm thinking about EFII too. Did you use a header tank?

[stinger]

Wow, I would park it in the living room ! Stinger

[Chris In Milwaukee]

Very nice! Well done!

[Bdflies]

Another beautiful Bearhawk!

congratulations!

Bill

[Greg_Marlow]

First flight N22GM was a few weeks ago. Has a Bob IO360 with EFII fuel injection and electronic ignition. Dynon panel. Fight went pretty well, had some cooling issues that were solved by a bigger cowl exit and a spoiler. Needed a tiny bit of rudder trim. Fabric is Oratex, with vinyl trim.