Aileron Servo placement

[U2fletch]

Right wing is a good place to locate aileron autopilot servo, so I would like to see any pics of their installation. I have a convenient spot in mind, but a clean attachment to the bellcrank is eluding me. Would be nice to use the same hole in the arm as the pushrod, but there is a clearance issue with the support tube.

[huntaero]

This is how i mounted my A/P servo in the RH wing
IMG_0005.jpg IMG_0006.jpg IMG_0007.jpg IMG_0010.jpg

[U2fletch]

Brilliant! I initially dismissed the capstan idea because I thought I needed to get to both cables. Nope, it’s a closed loop you just need to grab one.

[rkennell]

IMG_5703.jpg IMG_5664.jpgIMG_5667.jpg
I mounted mine under the copilot seat. It is a very accessible place and a good place to tie into the Skyveiw network.

[FFTravism]

I know Virgil is working on a adapter plate to mount the servos. Not sure the status as I am not to that point.
Travis

[U2fletch]

Here are some pics that Virgil sent me.. Servo2_resized.jpg Servo4_resized.jpg Servo3_resized.jpg Servo1_resized.jpg

[500AGL]

This is the pitch and yaw servo locations, at the last fuselage station. Pitch is a pushrod to the elevator bellcrank and Yaw is bridle cables to each rudder cable.