Mixture/Throttle Bracket

[Utah-Jay]

I am in need of some photos on how you guys bracketed/secured your cables towards the business end, i.e. near the mixture and throttle arms

Thanks in advance

[Nev]

I used a bracket supplied with the Vans FWF kit.

67646BDB-A706-4F35-9E8D-DD2DC4E11816.jpg

[Utah-Jay]

Thanks Nev

Where did you get that? Does it hold the throttle and mixture?

[Nev]

Here you go Jay - this probably isn't the exact part but have a look and you'll find it there. Yes it holds both throttle and mixture.

[alaskabearhawk]

I made my own. I have a number of posts on my kitlog…not hard to make.

http://www.mykitlog.com/users/displa...=302592&row=22

[Battson]

I also made my own, out of some leftover heavier sheet aluminium which I believe came with the kit. For all intents and purposes it's the same as the Vans one.

Because mine is a horizontal air intake, the bracket's exact shape is slightly different and extends further forward. I can add photos if there's any interest, although it may not be relevant.

[Utah-Jay]

Looks like TrueAirSpeed has one I can get. Nice to have a BH builder at my home airport