3d Printed Audio Jacks

[FFTravism]

I took someone's starting idea and changed it to fit my needs. I created it in CAD from ground up. It's a 3 port (Mic,Phono,LEMO) and 2 Port (Mic, Phono) Recessed audio jack.

Link has all files. I also created a cutting template. It is 1mm over sized on all sides.

https://www.printables.com/model/1472719-airplane-audio-jack-panel

[DBeaulieu]

Nice! 3D printing is good stuff...

[Nev]

Very nice work !

[TJ_Slice]

Can you provide the exact dimensions for the opening and screw holes? I think these would work well for my 3D printed wing closeout panels.

[FFTravism]

The openings you have to cut are
3 port is 3.3" x 2.95"
2 port is 2.3" x 2.95"


Travis

[TJ_Slice]

Thanks. What about the screw holes? I will model those into my panel

[FFTravism]

They are designed around size 6 machine screw. AN526C-632R10

[FFTravism]

My thoughts were to use K1000-6 nut plates. My audio jacks are going on a Kydex interior and I can install the nut plates on the kydex.