I am afraid I may be opening up a old wound with this topic that may seems like a 4 letter words in the tailwheel community. my questions are: is the tailwheel more prone to ground looping compare to tricycle (nose) gear? and how to minimize/avoid ground looping incident when flying with tailwheel?
here are my background information:
I am new to this forum; began my real world flying early last year with a flight school and almost finishing up with my instrument rating flying Cessna 172. My flight school just purchased Super Decathlon recently and I am planning to get my tailwheel endorsement after they have a qualify CFI to teach in this plane. The fact is I have zero experience with tailwheel and am a new aviator.
based on my research, I found a few experienced tailwheel pilots have had groud looping incident one point or another that caused serious damage to their aircraft. A Patrol at
Oshkosh in 2017 and a pilot of this forum mentioned he ground looped that damaged his tailwheel, then end up building a new one airplane instead of fixing the damage one.
I am still researching and learning about the home built aircraft and want to make sure i cover this concern before i fully commit to building a tailwheel.
any input welcome, thanks in advance.
here are my background information:
I am new to this forum; began my real world flying early last year with a flight school and almost finishing up with my instrument rating flying Cessna 172. My flight school just purchased Super Decathlon recently and I am planning to get my tailwheel endorsement after they have a qualify CFI to teach in this plane. The fact is I have zero experience with tailwheel and am a new aviator.
based on my research, I found a few experienced tailwheel pilots have had groud looping incident one point or another that caused serious damage to their aircraft. A Patrol at
Oshkosh in 2017 and a pilot of this forum mentioned he ground looped that damaged his tailwheel, then end up building a new one airplane instead of fixing the damage one.
I am still researching and learning about the home built aircraft and want to make sure i cover this concern before i fully commit to building a tailwheel.
any input welcome, thanks in advance.
Comment