Flap/Trim Wheel console

[rodsmith]

I mounted my trim wheel next to the flap handle, I have never cared for overhead trim actuators. I decided I wanted to cover the mechanisms to help prevent jamming with objects that might be dropped. Made the cover with 4 layers of 2x2 carbon twill. Total weight 8 oz. It is plenty sturdy and small enough that it doesn't interfere with pilot/passengers legs or feet. As you can see I also extended the flap handle about 5" as others have done.

DSCF1107.JPGDSCF1104.JPG

[davzLSA]

Im with you Rod on the trim wheel vs the lever!!!

[Gerhard Rieger]

I wish I have seen this earlier, excellent idea. Way past that. Looking real good.

[svyolo]

That looks awesome.

[Wyo Johnson]

Rod,

Nice work, check out McMaster Carr...brush strip. Might help with keeping the in-flight snacks out of the mechanisms

Andy
1423B

[quadra]

Very nice! any issues with inspection access?

[rodsmith]

No, will attach to the floor with 7 screws and nutplates.

[alaskabearhawk]

I remember back in 2008-09 Ron Burleigh did something similar. Here are a few photos that I saved from Ron's installation that might help others that are thinking about doing something similar.

100_9095.JPG100_9107.JPG100_9106.JPG100_9094.JPG100_9088.JPG

[rodsmith]

That is some nice metal work.