Beartracks subscribers will have seen the blurb about Bob making new carbon fiber wingtips. I didn't get the photos in time to include them in the newsletter, but here they are.
Announcement
Collapse
No announcement yet.
Photos of Bob's new Carbon Fiber Wingtips
Collapse
X
-
When I talked to Bob Barrows the other day, I asked him about strut and gear fairings for the LSA. He said that he was not making any, currently, but said that it seems he needs to. I hope he does so as I'm sure the LSA is going to be pretty popular. Bob Way
Comment
-
Originally posted by kestrel View Post
I think you mean "half a Bearhawk". ...it only carries half the family. ;-)
But seriously, carbon fiber wingtips for the Patrol – available or not? (Don't see them on Bob's site...)Jim Parker
Farmersville, TX (NE of Dallas)
RANS S-6ES (E-LSA) with Rotax 912ULS (100 HP)
- Likes 1
Comment
-
Once the Bravo is in full production, the Patrol and 4-pl wing tips will be the same. I'm not sure which ones are in the photo, but I like that the Bravo keeps the SKUs down for the factory.Last edited by Chris In Milwaukee; 01-10-2017, 09:48 PM.Christopher Owens
Bearhawk 4-Place Scratch Built, Plans 991
Bearhawk Patrol Scratch Built, Plans P313
Germantown, Wisconsin, USA
Comment
-
Try this link for the Patrol tips. I'm thinking that Bob's mold is for going over the ribs, but it would be best to call and check.
http://www.randbaircraft.com/_p/prd1...fiber-wingtips
Also, Bob pointed out to me that the prices are higher on his website to cover the Paypal fees and such. The best price comes from sending a check in the mail.
Comment
-
I talked to Bob about these last week. They are sized for the Patrol and Model B, not the original Bearhawk. Bob said a couple builders are modifying them for the Bearhawk. Disappointing! Now back to designing and building metal tips.
Comment
-
I am increasingly puzzled as to the suitability of composite material to cold weather operations of aircraft. I anticipate using fiberglass and/or carbon-fiber in/around the cockpit area and windows of my Patrol. Just how I will be doing it is not decided yet.
A lot of guys in my EAA chapter have carbon-fiber skis on their airplanes, They seem to work great and weigh only a few pounds. Commercial airliners (Airbus et al) are made of composite material and they operate at unimaginably cold temperatures. Yet I have seen uncounted examples of composite material failing at cold temperatures.
I remember my first SkiDoo snowmobile, I once had a very small dead stick poke at hole in the cowl at -30F (I am not exagerating here, I was a lot younger and dumber in those days). The stick was less than an inch in diameter and I could break it in my fingers, yet it punched a nice plug through the fiberglass material. Just this morning I was cleaning up epoxy from another of my projects (not my Patrol). A couple of days ago I had glued up some stuff inside the house with top-of-the-line Locktite brand epoxy and put all out in the shop last night. I was dreading trying to remove my drips and globs. No problem! The stuff crumbles or scrapes right off on parts that were out on the bench all night. The temps might have been in the single digits during the night, but it had warmed up to about 12F when I started scraping on it.
I am not about to make anything out of either epoxy or polyester resin if my experiences are any indication of the reliability of home-cured composite materials. The pros must use some special stuff, huh?Last edited by bergy; 12-15-2017, 12:07 PM.
Comment
Comment