Bearhawk Building Tips/Techniques

Topics	Statistics	Last Post
Manifold Pressure hook up by rodsmith Started by rodsmith, 09-16-2023, 09:24 AM	2 responses 186 views 0 likes	Last Post by Rollie 09-17-2023, 10:54 AM
Flap and Aileron Hinge Pocket Cover Plates by LynnR Started by LynnR, 09-24-2015, 11:55 AM	15 responses 779 views 0 likes	Last Post by Nev 09-10-2023, 02:37 PM
Flap and Aileron drain holes by rodsmith Started by rodsmith, 09-05-2023, 10:59 AM	6 responses 312 views 0 likes	Last Post by Battson 09-05-2023, 08:19 PM
Need to hang wings? by DBeaulieu Started by DBeaulieu, 09-04-2023, 06:06 PM	3 responses 187 views 0 likes	Last Post by DBeaulieu 09-04-2023, 09:36 PM
Drilling tabs by DBeaulieu Started by DBeaulieu, 08-07-2023, 06:56 AM	5 responses 381 views 0 likes	Last Post by DBeaulieu 09-04-2023, 05:51 AM
Fuel pump vent drain by rodsmith Started by rodsmith, 08-22-2023, 09:56 AM	2 responses 197 views 0 likes	Last Post by alaskabearhawk 08-23-2023, 07:00 PM
Mark-- any updates on the tubing kits ? by fairchild1934 Started by fairchild1934, 08-20-2023, 02:58 AM	0 responses 176 views 0 likes	Last Post by fairchild1934 08-20-2023, 02:58 AM
plastic film removal from aluminum sheet by fairchild1934 Started by fairchild1934, 07-03-2023, 03:14 AM	8 responses 1,338 views 0 likes	Last Post by fairchild1934 08-20-2023, 02:51 AM
Floor Boards by WoobyRoo Started by WoobyRoo, 08-15-2023, 08:15 PM	1 response 246 views 6 likes	Last Post by FFTravism 08-15-2023, 09:25 PM
Orifice size for fuel sight gauge restriction by rodsmith Started by rodsmith, 07-07-2023, 09:44 AM	10 responses 402 views 1 like	Last Post by AZBearhawk272 07-11-2023, 11:37 PM
rudder trim ? by fairchild1934 Started by fairchild1934, 04-02-2023, 11:01 PM	25 responses 831 views 0 likes	Last Post by 777Ben 06-23-2023, 03:53 PM
Engine Baffle Question by rodsmith Started by rodsmith, 06-20-2023, 01:49 PM	8 responses 416 views 2 likes	Last Post by Bcone1381 06-21-2023, 10:15 AM
Fairings by Bcone1381 Started by Bcone1381, 06-07-2023, 11:36 AM	22 responses 970 views 4 likes	Last Post by Bcone1381 06-16-2023, 10:47 AM
Wing stands and dollys by Bcone1381 Started by Bcone1381, 06-13-2023, 10:02 AM	3 responses 210 views 0 likes	Last Post by BravoGolf 06-15-2023, 09:26 AM
Garmin magnetometer wingtip mount by rodsmith Started by rodsmith, 05-29-2023, 09:44 AM	9 responses 537 views 1 like	Last Post by Utah-Jay 05-31-2023, 05:00 AM
Need Help with Flap Stop in 4-place by jonmiller0 Started by jonmiller0, 05-26-2023, 03:32 PM	12 responses 365 views 0 likes	Last Post by AZBearhawk272 05-28-2023, 11:14 PM
Can’t get engine mounted by spinningwrench Started by spinningwrench, 03-21-2023, 08:16 PM	18 responses 711 views 0 likes	Last Post by spinningwrench 04-04-2023, 02:44 PM
Swaged cable fittings vs Nicopres by arborite Started by arborite, 03-22-2023, 10:29 AM	16 responses 420 views 0 likes	Last Post by arborite 03-24-2023, 02:23 PM
Bolt orientation. by Bcone1381 Started by Bcone1381, 03-23-2023, 02:36 PM	4 responses 286 views 0 likes	Last Post by Bcone1381 03-24-2023, 12:58 PM
Trim Actuator Bar/Arm by Utah-Jay Started by Utah-Jay, 03-18-2023, 08:17 PM	6 responses 309 views 0 likes	Last Post by Nev 03-23-2023, 04:19 AM
Wing to Fuselage Fairing by rodsmith Started by rodsmith, 03-13-2023, 11:19 AM	15 responses 825 views 1 like	Last Post by spinningwrench 03-16-2023, 10:46 AM
Best rivet tool for pocket rib installation? by Chewie Started by Chewie, 01-29-2023, 10:16 AM	4 responses 282 views 0 likes	Last Post by marcusofcotton 01-31-2023, 07:58 AM
Rivet cutting tool and driving them as well as general rivet driving technique by JayDub Started by JayDub, 01-30-2023, 10:54 AM	2 responses 417 views 1 like	Last Post by kestrel 01-30-2023, 02:20 PM
Center stack installation by rodsmith Started by rodsmith, 01-27-2023, 12:55 PM	2 responses 214 views 2 likes	Last Post by rodsmith 01-28-2023, 08:29 AM
Wing stands and dollies by Bcone1381 Started by Bcone1381, 01-27-2023, 08:10 AM	0 responses 134 views 2 likes	Last Post by Bcone1381 01-27-2023, 08:10 AM
Dual Purpose Fans by rodsmith Started by rodsmith, 10-12-2022, 10:07 AM	12 responses 543 views 3 likes	Last Post by 500AGL 01-03-2023, 05:47 PM
Which Taxi Camera? by Utah-Jay Started by Utah-Jay, 11-24-2022, 12:57 AM	5 responses 498 views 0 likes	Last Post by Utah-Jay 01-01-2023, 09:48 AM
Mixture/Throttle Bracket by Utah-Jay Started by Utah-Jay, 12-12-2022, 07:47 PM	6 responses 308 views 0 likes	Last Post by Utah-Jay 12-14-2022, 07:30 PM
Spar flange bend radius by Frank Started by Frank, 12-10-2022, 11:39 PM	4 responses 235 views 2 likes	Last Post by sjt 12-14-2022, 01:53 PM
Carb Heat Box by Utah-Jay Started by Utah-Jay, 12-10-2022, 07:09 PM	6 responses 328 views 0 likes	Last Post by Utah-Jay 12-11-2022, 11:27 AM
Heavy Wing...need help on how to proceed. by Aero_tango Started by Aero_tango, 11-11-2018, 09:52 PM	31 responses 2,342 views 2 likes	Last Post by stinger 12-03-2022, 08:06 AM
Have you encountered this? by Frank Started by Frank, 11-24-2022, 05:18 PM	10 responses 376 views 0 likes	Last Post by svyolo 11-25-2022, 10:33 PM
Typ. ? by Frank Started by Frank, 11-13-2022, 04:03 PM	2 responses 214 views 0 likes	Last Post by Frank 11-24-2022, 05:12 PM
Rudder Cable Fairing by Utah-Jay Started by Utah-Jay, 11-23-2022, 10:07 AM	8 responses 267 views 0 likes	Last Post by alaskabearhawk 11-23-2022, 08:08 PM
Hoerner Wing Tips by Nrtabor5 Started by Nrtabor5, 11-07-2022, 03:00 PM	9 responses 593 views 0 likes	Last Post by Nev 11-20-2022, 12:39 PM
Aileron nose rib hole for counterbalance tube by Rootster Started by Rootster, 11-09-2022, 11:08 AM	0 responses 134 views 6 likes	Last Post by Rootster 11-09-2022, 11:08 AM
SeatBelt attach point issue, help needed by Utah-Jay Started by Utah-Jay, 10-31-2022, 07:01 PM	9 responses 429 views 0 likes	Last Post by marcusofcotton 11-06-2022, 08:37 PM
Aircraft Ruler - PEC/Taylor Toolworks 36" and 48" Blem Flex Satin Chrome by SpruceForest Started by SpruceForest, 09-30-2022, 03:19 PM	1 response 177 views 1 like	Last Post by Redneckmech 10-27-2022, 02:30 PM
How to attach the shock strut fairing? by DavidGA2 Started by DavidGA2, 10-09-2022, 02:56 PM	2 responses 298 views 0 likes	Last Post by DavidGA2 10-12-2022, 08:18 AM
Annealing Aluminum Tubing by noema Started by noema, 10-09-2022, 04:11 PM	6 responses 271 views 0 likes	Last Post by alaskabearhawk 10-11-2022, 11:50 PM
Welding by spinningwrench Started by spinningwrench, 10-08-2022, 05:28 PM	4 responses 360 views 2 likes	Last Post by podo 10-11-2022, 10:23 AM
Electrical System Failure Modes and Design Reading (FAA Engineering Job Aid) by triumphantduke Started by triumphantduke, 10-05-2022, 09:29 AM	1 response 250 views 1 like	Last Post by noema 10-10-2022, 03:19 AM
Rotisserie Design by spinningwrench Started by spinningwrench, 08-03-2020, 08:38 PM	4 responses 555 views 10 likes	Last Post by ElliotAbel 09-21-2022, 10:48 PM
Sealant for windows/windshield? by rodsmith Started by rodsmith, 09-16-2022, 10:32 AM	11 responses 431 views 1 like	Last Post by Rollie 09-20-2022, 06:27 AM
General Aviation Hardware - what I learned. by Bcone1381 Started by Bcone1381, 08-11-2022, 12:47 PM	5 responses 445 views 0 likes	Last Post by Steve W 09-18-2022, 11:52 AM
Sealing antennas by rodsmith Started by rodsmith, 09-16-2022, 10:18 AM	1 response 132 views 0 likes	Last Post by N3UW 09-16-2022, 12:41 PM
For Scratch-builders...20 Ton Press/ 20 Ton Air/Hyd Jack on Sale at HF This Week by SpruceForest Started by SpruceForest, 08-26-2022, 07:26 AM	11 responses 373 views 2 likes	Last Post by rcraddock 08-28-2022, 09:29 PM
stuck shock strut cap by Pat Fagan Started by Pat Fagan, 08-12-2022, 12:52 PM	3 responses 316 views 0 likes	Last Post by Pat Fagan 08-12-2022, 05:48 PM
EarthX Battery Box Modification by alaskabearhawk Started by alaskabearhawk, 08-10-2022, 01:08 PM	1 response 282 views 8 likes	Last Post by Wyo Johnson 08-10-2022, 08:39 PM
Cutting 2024 Alclad with a box cutter by noema Started by noema, 08-03-2022, 05:49 AM	5 responses 278 views 6 likes	Last Post by noema 08-04-2022, 03:26 PM

Previous 1 2 3 4 5 6 12 template Next

No topics found.

Mark This Channel Read

Announcement

Bearhawk Building Tips/Techniques